On the back of a 1966 galaxie 7litre ignition switch is a black wire with a green strip and a small black wire. They are connected together and attach to the center peg of the switch. Where does this wire go to?
Whats happening is that when these wires are hooked up the switch is sending 12 volts to the starter ssolinoid and the engine wants to crank in the on positon not the start position.
Any help.
Thanks
Whats happening is that when these wires are hooked up the switch is sending 12 volts to the starter ssolinoid and the engine wants to crank in the on positon not the start position.
Any help.
Thanks