biggalaxie

for a 67 galaxie. i had mine seperated put in boxes and labels on the inside with them. and in the garage cleaning process someone (i really hope it wasn't me) disposed of them. i don't really care if they are new or used etc but they are badly needed. thanks, matt

Ford Muscle Forums

63ford406

Try AMK Products Inc. www.amkproducts.com

rayell

Well; the above is the high dollar way, but if you don't care if they are used go junkyarding. Most under the hood bolts are 5/16"x1" with SAE (fine) threads, though some are 1 1/4" inches long. They do not have to be hardened on sheetmetal. I buy mine at an industrial fastener supply store in my localityIf you don't have such a store, go to a hardware store and buy hex head bolts and use a washer.

On my car I opted to use S/S bolts and washers for looks, and to avoid them rusting.

An industrial fastener store will have the correct size carriage bolts, nuts and washers in stainless for the bumpers. If you want the chrome covered cap bolts they will have to be bought from one of the high dollar auto parts suppliers.

If you don't have the inner fender slip on nuts, use nuts, flat washers, with lock washers.

No one will be looking under the fender to see what type nuts hold the fender on.

Beoweolf

Not real sure if this is what you ae looking for, But there is a listing for Body Bolt Kit, in Concours Parts and accesories.

http://www.concoursparts.com

5/16 x 24 x 5/8" for a package of 50 and 5/16 x 24 x 1", again for a package of 50. they also have interior and exterior screw kits, all pre-packaged. You'll be surprised at what is (or isn't) available for different years and model in the various catalogs. If you had a 63-64, you'd find much more to choose from.

There are around 5 or 6 big catalog online companies that sell hard parts, reproductions for Big Fords and Galaxies. You'll start learning the players once you get into it a little deeper. Then there are about 20 more or less famous for used parts, or year specific items.

If you aren't already a member, you should look into joining FGCoA (Ford Galaxie Club of America), lots of Galaxie resources, leads and good ol' horse trading goes on over there. It has members only newsgroup, not as lively as this one, some of the guys are known to be very knowledgable when it comes to Galaxie.

<font size=-1>[ This Message was edited by: Beoweolf on 12/6/05 4:55am ]</font>

v8shadow

matt, i sent you a personal e mail on this

__________________
KEN
Factory 65 Galaxie 500 390/4v