ScottURnot

351w, procomp heads, Edelbrock injection. Just some mock up pictures, if we can get some good weather we are about ready to put it in. What do you guys think of the air intake set up? We are trying to give the engine bay a little more technology type look.

Attached Thumbnails

     

 

puttster

Air intakes look great! Never seen that, where did you get it?

__________________
When you're going through hell, keep going.
Putts drives a 1965 four door Galaxie. Rebuilt 390. 4100 on a Performer, AC, PS, PB w scarebird front discs, COM MX transm w/3.0 R.E. The seats, dash and hood are customized.

Sifu-Sitaigung

Looks great!! I like the Shovel head you have beside it too! still building I see..(Or repairing) No dash or gas caps.. Looks good though. yours?

__________________
1967 Galaxie Fact. XL "Z" code (390-soon 431cid) C-6- Fact. A/C, P/S,P/B (stock K/H disc), All Fact. Tinted glass
1967 Gal. Complete parts car
2006 Mustang GT 5 speed

ScottURnot

Its a spectre intake, the fabricated style are a little tougher to find but i like the tig welded look.

EXracer4speed

It would a lot cooler with 2 snorkels going to the front.

Air cleaners make it look like it came off the saggy pants kids Honda.

And those china heads copyright infringed, hopefully the seats don't fall out.

Good luck.

__________________
64 Galaxie XL - soon to be 427/toploader

ScottURnot

Not sure i agree with you on the saggy pants Kids honda deal, But thats only a opinion. LOL

I wanted to pipe it to the fenders, but its my boys (no saggy pants lol ) car and he likes it, may still change it, we shall see. As far as the heads I have my fingers crossed, I did have the heads gone thru by a local machine shop so I am at least not flying completely blind.

agggilli

I like your pulley set up, who makes that? Also, which Edelbrock injection system is that? (P/N)

__________________
In early spring 2014 I'll be looking for a beautiful 1963.5 Galaxie 500 XL 4 speed in pristine condition. This was the first car I ever drove and I'd like it to be the last car I ever drive.

ScottURnot

Its actually a 1940 Harley Knucklehead, its a work in progress. It will be my gals bike when its done, she really wants me to get back to working on it instead of all these cars. LOL
Here are some pictures of my other 1940 Knuckle, I am actually wanting to change some stuff on it as well but at least its a rider!

Attached Thumbnails

     

   

ScottURnot

The pulley system is a CVF Racing setup. They have complete pulley systems for several ford configurations. I would link you but i am not sure if this forum allows links. Just google them and look for complete systems, they offer with air or without.

The Injection set up is older, I bought it new in the box from a guy that abandoned his project. The part number is Edelbrock3541 Pro-flo EFI, they have a newer system but I dont think the new system is as complete with ignition parts as well.

agggilli

Thank you for that information Sir!

__________________
In early spring 2014 I'll be looking for a beautiful 1963.5 Galaxie 500 XL 4 speed in pristine condition. This was the first car I ever drove and I'd like it to be the last car I ever drive.

juddp39532

Dump all the China parts on them heads! I have a set and the rocker studs kept breaking with a small e-303 hyd. cam a valve spring broke luckly when I was a block from the house driving slow. I've replaced all the parts but the bare castings. I could have lost a motor if that spring had broke when I was at higher RPM!

__________________
http://www.southerngassers.com/

ScottURnot

Thanks for the info but I think we have it covered. Rocker studs are ARP 7/16, springs are Edelbrock, had the heads gone thru so I hope they will be good.

lagalaxie500

A man at work has a 351 shortblock with a C6 . He THINKS it came out of a 79 ford . Are parts hard to find for a 351?

frdnut

No..

__________________

1968 mustang 408W Hybrid..Burns gas and rubber!
11.82@120.85mph shakedown pass.

ScottURnot

A man of many words. LOL