Monster C4 Thread Text - Edited (Way Long) Version2
On 2003-04-13 02:21, flynsolo wrote:
c4 clearance I would like your opinion's on the total clearance you run on the input shaft when running a trans-brake. I noticed no one talks much about clearances and they are so important. Thanks Wayne
I thought that was in there but generally I think everyone runs as little as possible. I put in thicker ones until the tranny binds and back off one thickness. End play is very important, you are right about that.
Remember the small selective does the geartrain and the large one on the pump does the clutches. Both are important. Do the small one first and then the large.