Re: Solid flat tappet to solid roller
Nobody said a 0.800" roller was going to be installed in this 393W with RPM heads. A good roller with the proper lift would probably give this engine a nice little pick-me-up... especially if the solid cam that's in it now is on the slow side.
Some of the answer is already there......
at .200 sft is 159/166 roller is 170/176
lift 560/576 614/621
same 1.6 rocker arms for both
heads are Stock Edelbrock RPM flow 250 @500
"Many claim experience and knowledge based upon how often they dispense advice" (Greg Banish)
Oh so true....