Re: 74 4x4 C4 Rebuild
Well I'm close to the end of my rebuild. Everything went smooth. I really took my time and made sure everything was correct. Before I started my endplay was 0.041. I used all new Thrust washers and now I'm getting 0.0.021. I have a #2 Thrust washer that is a little thicker that came with the kit. Am I ok with 0.021 or should I make it less?
I added the #9 cooling hole with a C5 Thrust washer and added a kit from Broader Performance to add 5 frictions to the High Reverse clutch.
I also added a C5 sun shell and gear with the 4 oil holes. Reamed the real cooling return line and took the 2 check balls and spring out of the pump.
The Shift Kit came today so I'll be doing that next.
Awesome site, Thanks everyone for getting me this far...