Re: Trans Go 40-2 instructions
On that 40-2 kit i always remove it. Fit the kit up as per instructions , depending on what stall you use select the yellow or green spring. If you find it shifts too hard you could remove the spring from the cutback is how I have done it to soften it up a tad
Thanks I remove it!
The stallspeed will be very low.....A new converter is built for this car and will be around 1700-1800rpm
A Gear Vendor will be bolted to that C4 so thats why the stall is low
The car will also pull a caravan so what spring is recomended?