electric fuel pump mounting locations - Ford Muscle Forums : Ford Muscle Cars Tech Forum
 
LinkBack Thread Tools
post #1 of 3 (permalink) Old 03-03-2002, 05:21 PM Thread Starter
Registered User
 
Join Date: Jul 2001
Posts: 83
electric fuel pump mounting locations

I am upgrading my fuel system and have purchased a Holley electric pump and fram fuel filter. The pump instructions say to mount the pump by the gas tank and slightly below so the pump is gravity fed. Well, there is no way to mount mine below the tank. I can get it real close to the tank but closer to the top of the tank. Is that going to work? I have the nitrous ready to go but I need the fuel pressure and volumn. I have a 69 Cougar and have no other place to mount it. Any suggestions. Thanks
luebben is offline  
Sponsored Links
Advertisement
 
post #2 of 3 (permalink) Old 03-03-2002, 09:54 PM
Registered User
 
Join Date: Apr 2001
Posts: 359
electric fuel pump mounting locations

just mount as close to the tank as you can, and use a big feed line. mounting on the inside of the fender or somewhere close to there should be good
lordviper13 is offline  
post #3 of 3 (permalink) Old 03-03-2002, 10:22 PM
Registered User
 
Join Date: Dec 2001
Posts: 314
electric fuel pump mounting locations

I have a 69 Mustang. Chassis wise it is the same as your Cougar. When I first installed my Holley pump I made a bracket for it. It was a piece of aluminum plate. About 4" wide X 9" long X 1/8" thick. I bent it into an L shape. The short leg was about about 4", long leg about 5". Was not bent at 90, more like 70. The angle matched the slope of the metal directly behind the tank in the trunk. Bolted the bracket to the trunk floor and then the pump to it. It made the bottom of the pump about 1" lower than the tank. I used rubber (old shock bushings) between the bracket and trunk floor to cut down on the noise. I was using a small inline filter.

Worked great like this until I put a fuel cell in and moved the pump and new cannister filter and a new bracket over to the passenger side frame rail because the fuel cell sump was in the rear. Later on I back-halfed the car and mounted the pump and filter on the new frame rail in about the same location. A pic of the new setup: Note that the Holley blue in the pic is now a Holley Black. The filter is from Russell.
http://home.bellsouth.net/personalpa...4U&uh=18981661,2,David&uzip=35907&ver=3.0

Later,

David Cole

Dave C is offline  
Sponsored Links
Advertisement
 
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the Ford Muscle Forums : Ford Muscle Cars Tech Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in











Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page



Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome