Fuel Pump Eccentric Pin
I have a 68 mustang w/ a 289. I recently purchased a "Comp Cams" Camshaft, and with it they supplied two pins to connect the cam to the eccentric, one 1 and 1/8, the other 1 and 3/8. Well the 1 and 3/8 was the same size pin as the one I took out of my old cam setup, so I just used that. Well later did I find out that "Comp Cams" drills the hole in the camshaft longer than stock. So, anyway the pin wasn't driving the eccentric. I called "Comp Cams" and they then told me that they don't send out the right pin for the one piece eccentric, but they would send me the right pin free of charge.(That pin is 1.5 in.) Just posting for any future "comp cams" customers so they don't make the same mistake I did.