Hey guys, any help appreciated. Car is a 73 Torino. Hazzards work just fine and all bulbs are good. Flasher and fuse are good too. But, I can't get the turn signals to work. I've tried three different spare turn signal cam switches too so I know I don't have a bad unit. What's the deal?
Sometimes when the turn signal switch is replaced people will just cut the wires at the connectors and patch them back together. This is a very common place for a wire to come loose. If you did re-pin the connector make sure your color codes match up.
Also, when you say the flashers are working are you going around and verifying that the lights are all blinking? I have had a problem where the flasher would wink as if it were working but a light socket was worn out and the bulb wouldn't light up. I had to replace the light socket.
1965 289 mustang fastback
as of Jan 16, 2005
60 ft: 1.65 8th:7.49 @ 90 qtr: 11.85 @ 113 mph
[ This Message was edited by: Hottarod on 5/23/05 6:23am ]