Join Date: Jan 2008
Location: Seattle, WA area
Re: injector size help 2.55L ohc (pinto) Stroker
Careful buying injectors to upgrade. Your originals are rated at only 30.45 psig, and most being sold are rated at 43.5 psig rail pressure. Based on the original injector size and anticipated power (37% increase), your new injectors should flow about 19 lb/hr at 30.45 psig. This will require injectors rated at 23 lb/hr at 43.5 psig, and at the lower pressure your system runs, will actually flow the 19lb/hr. The closest common size injectors are 24 lb/hr.
-=≡ If it was easy everyone would do it ≡=-
[size=1]HotShotsJava.com Hot Shots Java Coffeehouse, Poulsbo ,WA fair trade and 100% organic. Voted best espresso and coffee![/size]