Ford Muscle Forums : Ford Muscle Cars Tech Forum

Ford Muscle Forums : Ford Muscle Cars Tech Forum (https://www.fordmuscleforums.com/forumindex.php)
-   Body and Paint Articles (https://www.fordmuscleforums.com/body-paint-articles/)
-   -   Refurbishing Your Tail Lights (https://www.fordmuscleforums.com/body-paint-articles/486852-refurbishing-your-tail-lights.html)

Bumblebee 06-08-2009 08:40 PM

Refurbishing Your Tail Lights
 
1 Attachment(s)
I don't believe there are any of us who have not been plagued with faded or crazed (small hairline cracks) tail light lenses. This project has the benefit of being relatively easy (2 wrenches out of 5 if you have some basic equipment). It adds a beautiful luster to the finished product, has UV Protection, and refurbishes your 30-40 year old, impossible to get, and ridiculously expensive lenses. Furthermore, following this method will give years of beauty to your lenses.

What you will need
• Air Compressor
• Paint gun, detail gun, or airbrush
• Automotive grade urethane clearcoat, activator, reducer, and fisheye reducer
• 800-1000 grit sandpaper
• Safety equipment for painting

Step 1
Remove the tail lights or headlights. This step is not 100%necessary. However, if you decide to paint with the lenses still on the car, understand that not all surfaces of the lenses will be refurbished. Also, you'll need to make sure that you mask the car very well or you WILL get overspray on your ride.

In the photos below you will see that I am refurbishing tail lights off an early model Opel that we customized into my sons car. These lenses were badly faded and crazed. Crazing occurs when the lens has been exposed to the sun, and over time they dry out and get small fractures in them.
http://www.fordmuscle.com/TEX2/TailLights/S7300235.jpg

http://www.fordmuscle.com/TEX2/TailLights/S7300236.jpg

Step 2
Thoroughly clean the lenses with a non greasy or waxy cleaner (don’t use furniture polish, oil soap, etc)
http://www.fordmuscle.com/TEX2/TailLights/S7300237.jpg

Step 3
Using 800 to 1000 grit sandpaper, sand the exterior (and if possible or necessary, the interior) of the lens. Most tail lights have a series of facets on the inside making sanding next to impossible. Once you have sanded to a satin finish, take a clean, lint free cloth, put a small amount of paint reducer or paint prep on the rag and thoroughly wipe down all surfaces on the lens. Use a tack rag to remove any lint or dust from the surface. <?xml:namespace prefix = o /><o:p></o:p>
http://www.fordmuscle.com/TEX2/TailLights/S7300238.jpg
<o:p></o:p>

Step 4
Following the paint directions, mix enough of the clear coat paint, activator, and reducer to complete the project, then add a few drops of the fisheye eliminator to eliminate any wax or fingerprints you missed.

If your lenses are badly faded you can visit your local body shop and ask the painter to tint some (not all) of your clear coat paint (before mixing) to approximate the color of the lenses.
http://www.fordmuscle.com/TEX2/TailLights/S7300240.jpg

If your lenses are crazed, start with the inside. Paint a relatively heavy coat of paint on the inside of the lens. Place the lens face down on a clean surface to allow the paint to penetrate any cracks and crevices in the interior of the lens. Wait until the lens is flash dry (15-20 min) and paint another lighter glossy coat. When this coat has flash dried, hang the lens from a wire hanger and paint the exterior of the lens. If the lens is crazed, paint a relatively heavy coat on the outside first (not heavy enough to run) and follow up with another coat as you did on the interior. Allow to dry thoroughly and reassemble. If you do happen to get a run in the clear, allow it to dry thoroughly, wet sand the run out, and repaint.

Note: If you are using a tinted clear on the lens, add an additional plain clear over the tinted coat.
http://www.fordmuscle.com/TEX2/TailLights/S7300241.jpg

If your lenses are severely crazed as mine were you may not remove all of the crazing, but it will be drastically reduced. As with every painted surface on your vehicle, the lenses will need to be waxed on occasion and if you have painted your headlight lenses make sure you get the bugs off in a timely manner just as you would your front bumper to keep the acid in the bugs from eating through your paint.

Here's a couple of pics of a finished lens.
http://www.fordmuscle.com/TEX2/TailLights/S7300244.jpg

http://www.fordmuscle.com/TEX2/TailLights/S7300245.jpg

http://www.fordmuscle.com/TEX2/TailLights/S7300246.jpg

That’s it! Pretty easy and the results are impressive. Most of all have fun keeping your old (or not so old) Ford on the road and looking good!

Keith/Bumble

F15Falcon 06-16-2009 04:24 PM

Re: Refurbishing Your Tail Lights
 
Nice write up, I have used the same process with great results.

garner67 09-17-2009 10:16 PM

Re: Refurbishing Your Tail Lights
 
The headlight lens on my 01 Tacoma have become very hazed. Could I apply this same approach to clear headlight lenses, too?

crawler 11-24-2014 06:21 PM

Re: Refurbishing Your Tail Lights
 
I bought and used a Megs heavy duty headlight restoration kit. At first it works really well, but the hazing came back after some months. In the end I just bought and replace it with a new tail light cover.


All times are GMT -7. The time now is 03:27 PM.

Powered by vBulletin® Copyright ©2000 - 2019, vBulletin Solutions, Inc.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.
User Alert System provided by Advanced User Tagging (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.

 
For the best viewing experience please update your browser to Google Chrome