Join Date: Apr 2011
Location: Edmonton, Alberta Canada
Re: C4 Pump and Input Shaft
A pic looking straight down the end of the stator where the holes are would help...but...
...if my old guy memory is right the washer only easily fits in 2 possible ways.
Either one is correct.
Basically the 2 tabs go in holes straight across from each other, and either of the 2 notches should be above the hole that has an orifice plug in it.
That orifice plug is the lube circuit, and the notch lets the oil thru to lube the washer.
As long as the washer is installed so you can see the orifice plug below either notch, it's good.