1968 Ford Falcon Rust Free IFS Roller! $4900 - Ford Muscle Forums : Ford Muscle Cars Tech Forum
 
LinkBack Thread Tools
post #1 of 8 (permalink) Old 11-03-2015, 10:33 PM Thread Starter
Registered User
 
Join Date: Sep 2011
Posts: 16
PRICE DROP: 1968 Ford Falcon Rust Free IFS Roller! $4000

The time has come for me to let go of my beloved Falcon. Selling as a roller with no engine. Comes with the original C-4 trans.

This is a rust free Albuquerque car that I purchased and brought to Colorado in 2011. Solid as a rock, it has been garaged the entire time I have owned it. It has been my passion the last four years.


Features:

TCI Independent Front Suspension w/ coilovers

Manual rack and pinion

11" Wilwood front brakes (manual)

Wilwood 7/8" master cylinder and proportioning valve

Modified Crites subframe connectors

Beautiful original uncracked torino/fairlane dash conversion

Calvert split monoleaf rear springs (Lowered 1")

Caltracs Traction bars

Stock 8" rear end

Battery relocated to trunk

Car will come with the original bench seat, however I have done the bucket seat conversion (welded bucket seat support to floor, out of a donor fairlane) so buckets will work.

Eastwood Company carpet underlayment

New black carpet, although some dummy cut the light clicker hole in the wrong spot so it could stand to be redone in the front

Original radio delete panel

All steel cowl induction hood, built from the skin from a donor hood...needs to be finished

The car comes with small block ford motor mounts, but there's plenty of room for whatever you want to run! Coyote? 4.6? BBF??

But if you plan on running a 351 windsor based motor, like I was, I have a rear sump canton 7-qt pan that is already notched to clear the steering rack that will go with the car.

Car has various dings and scratches and the paint looks like it's a maaco job from 1984. But, I was going for the sleeper look. Again, this car has NO RUST and will save you thousands in rust repair if you do decide to make it perty and paint it.

All put together it has an awesome stance and looks like it means business. Compliments all the time.

Comes with old tires and wheels so it can be rolled around.

$4,000 obo. Clean Colorado title.

Connect with me here or give me a call or text at (720) 232-5142 if you'd like to chat about the car.

Ryan

Last edited by Perry1977; 11-17-2015 at 09:50 AM. Reason: Price drop
Sponsored Links
Advertisement
 
post #2 of 8 (permalink) Old 11-03-2015, 10:40 PM Thread Starter
Registered User
 
Join Date: Sep 2011
Posts: 16
Re: 1968 Ford Falcon Rust Free IFS Roller! $4900

Pics.
Attached Thumbnails
Click image for larger version

Name:	20150502_142950.jpg
Views:	177
Size:	211.0 KB
ID:	106769   Click image for larger version

Name:	20151025_170143.jpg
Views:	723
Size:	219.7 KB
ID:	106777   Click image for larger version

Name:	20151025_113839.jpg
Views:	185
Size:	215.7 KB
ID:	106785  

Click image for larger version

Name:	20151025_170539.jpg
Views:	337
Size:	208.8 KB
ID:	106793   Click image for larger version

Name:	20151025_173814.jpg
Views:	202
Size:	198.1 KB
ID:	106801   Click image for larger version

Name:	20151025_174355.jpg
Views:	669
Size:	228.8 KB
ID:	106809  

Perry1977 is offline  
post #3 of 8 (permalink) Old 11-03-2015, 10:46 PM Thread Starter
Registered User
 
Join Date: Sep 2011
Posts: 16
Re: 1968 Ford Falcon Rust Free IFS Roller! $4900

Here are the two build videos:


[link]https://[/link]


[link]https://[/link]

Last edited by Perry1977; 11-03-2015 at 10:49 PM.
Perry1977 is offline  
 
post #4 of 8 (permalink) Old 11-03-2015, 11:32 PM
Registered User
 
Join Date: Jan 2010
Location: Sacramento
Posts: 108
Re: 1968 Ford Falcon Rust Free IFS Roller! $4900

Quote:
Originally Posted by Perry1977 View Post
Pics.
What an awesome car. The 3rd gens are so overlooked. I have the exact same year except mine was originally a bucket seat car, 289 and a C-4 automatic with front disc brakes. I am looking for a cowl hood to have clear the 408 Windsor I currently have in their now. Running the Vic jr. intake. where did you get the cowl hood?

2012 CTS-V Coupe stock for now. 68 Falcon Futura. 408W Boss 351 block TKO 600 5spd currie 9" 3.70 ratio. Coilover suspension. 11.912 @118 MPH with only 1.8 60'
DIAMONDBACK is offline  
post #5 of 8 (permalink) Old 11-04-2015, 10:54 PM
Registered User
 
Join Date: Jan 2010
Location: Sacramento
Posts: 108
Re: 1968 Ford Falcon Rust Free IFS Roller! $4900

Any interest in selling hood?

2012 CTS-V Coupe stock for now. 68 Falcon Futura. 408W Boss 351 block TKO 600 5spd currie 9" 3.70 ratio. Coilover suspension. 11.912 @118 MPH with only 1.8 60'
DIAMONDBACK is offline  
post #6 of 8 (permalink) Old 11-04-2015, 11:01 PM Thread Starter
Registered User
 
Join Date: Sep 2011
Posts: 16
Re: 1968 Ford Falcon Rust Free IFS Roller! $4900

Quote:
Originally Posted by DIAMONDBACK View Post
Any interest in selling hood?
Hey thanks for the kind words, I meant to reply earlier. No, I would rather sell the whole car or nothing at all...did you watch the build video? You can see what I did to fab up the hood in that one....probably not the best way to do it but it made sense to me. It's a 3".


Ryan
Perry1977 is offline  
post #7 of 8 (permalink) Old 11-05-2015, 11:57 PM
Registered User
 
Join Date: Jan 2010
Location: Sacramento
Posts: 108
Re: 1968 Ford Falcon Rust Free IFS Roller! $4900

Quote:
Originally Posted by Perry1977 View Post
Hey thanks for the kind words, I meant to reply earlier. No, I would rather sell the whole car or nothing at all...did you watch the build video? You can see what I did to fab up the hood in that one....probably not the best way to do it but it made sense to me. It's a 3".


Ryan
Yeah I checked it out yesterday for the first time. I actually think it looks pretty good and innovative, plus it keeps that 60's Ford body lines. The way you had your hood previously ( with a circle cut the exact size of the air cleaner) is the way mine is now. I think I need a hood because back in 2001 when I first bought my car the hood flew up on me (I forgot to make sure it was completely shut) causing a crease in the hood. It still shuts and everything, but some body guy's say they don't know if they could get the crease out and I'd be better off getting another hood. I think only 66-69 Falcon hoods are a direct fit for our car. Anyways though I'd at least ask. Do you know of another hood around there? If so would you be willing to make another hood like that? I would definitely buy. Thanks.

2012 CTS-V Coupe stock for now. 68 Falcon Futura. 408W Boss 351 block TKO 600 5spd currie 9" 3.70 ratio. Coilover suspension. 11.912 @118 MPH with only 1.8 60'
DIAMONDBACK is offline  
post #8 of 8 (permalink) Old 11-17-2015, 09:47 AM Thread Starter
Registered User
 
Join Date: Sep 2011
Posts: 16
Re: 1968 Ford Falcon Rust Free IFS Roller! $4900

I'm getting absolutely no action on this car, which is sad. It's now pushed outside and getting snowed on, need to move it. $4k buys it. Here's a video walkaround of the car....



Ryan
Sponsored Links
Advertisement
 
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the Ford Muscle Forums : Ford Muscle Cars Tech Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in











Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page



Similar Threads
Thread Thread Starter Forum Replies Last Post
1968 1969 Fairlane Cobra Ranchero Torino Rust-Free L & R Fenders pvan Body and Exterior 2 06-16-2016 10:15 AM
Rust free az 1966 ford galaxie parts dbgphxford Body and Exterior 2 03-31-2013 09:08 AM
Rust free arizona 1966 ford galaxie parts dbgphxford Galaxie Pages 7 09-29-2012 07:26 PM
1966 Ranchero-Falcon Last year 289, Auto PS, RUST FREE Texas Truck falconwagon62 Ranchero 2 06-11-2011 01:55 PM
1963 1/2 Ford Galaxie 500 XL - Rust Free Show Car! croat Galaxie 0 03-02-2010 09:14 AM

Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome