Ford Muscle Cars Tech Forum banner

Engine/Transmission Change Questions

785 views 1 reply 2 participants last post by  jhooch 
#1 ·
I posted quite a while back and was thankful for all of the answers that I got from everyone. I have a couple more questions I am hoping you can all help me with.

I currently have a 240 with a C4. My 428 is coming back from the shop in a couple of weeks and I have an uncle that is donating a C6. I'm having troubles trying to figure out what motor mounts I need. I am also curious whether I need a different transmission cross member or anything else I need to take into account.

Lastly I am looking for headers for the 428 and haven't been able to find anything that is much under $500 so if you have run into any more reasonably priced one's please point me in the right direction.
 
#2 · (Edited)
Basically use mounts from a 352/390. The FE's are all the same. You will probably be able to use your trans crossmember with slight modifications. Crites is the best place for headers. Costly, but they're good. Make sure you have the correct flexplate for the 428. They are externally balanced.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top