Re: 63 Head Liner install
I'm getting ready to do my 63.
When I took it all apart, I found the center section supported by a color coded set of steel rods that were anchored in holes down the sides of the car. The entire perimeter of the headliner was stapled to cardboard strips that had been stapled to the steel roof perimeter. The front section of the roof only had a few short pieces of the cardboard due to the mounts for the sun-visors.....because of that, the headliner was glued to the steel and wrapped around the top lip of the windshield "tray". In other words, the headliner is stretched around to the outside of the roof above the windshield before the rubber gasket and windshield were installed.