Used Scuff Plate '64 2-door - Ford Muscle Forums : Ford Muscle Cars Tech Forum
 
LinkBack Thread Tools
post #1 of 12 (permalink) Old 07-03-2016, 10:30 AM Thread Starter
Moderator
 
Join Date: Jun 2003
Location: Spanaway, WA
Posts: 21,511
Used Scuff Plate '64 2-door

Any of you have a passenger side sill/scuff plate laying around? There are new ones but I'm a weirdo and don't want new if I can avoid it.
Hard to see it really but friend thought he'd mess with the good side for a couple hours and then go to cruise. Well we thought we'd do some adjusting because my car runs so rich and bout gassed him out. On and off of the carb 4 times or so and think might have the vacuum leak gone. It was huge!

The screws holding the plate on the bottom side of the accelerator pump was hitting the spacer and making a gap and the new fangled carb spacers aka performance gaskets according the butt nugget at parts store (will never go to that one again) with the 2 holes in each corner was causing a leak through the extra hole that isn't used on mine. We made our own as the store guy was a jerk and we didn't want to run cross country to another store. So in the end we didn't make it to the cruisel=.

This is his ride, which will explain why i almost gassed him to death, amazing what you smell more of when in a topless car! '59 Ranchible conchero, whatever it may be called, this is Rusty. Started out as a rusted out ranchero, can still see the ground when looking through the hole where the door hinges are. Started out gonna be a ratrod and he went the other way. Met him bout 3 or 4 yrs ago when he wanted to see how the convertible top boot was done. Includes rattle can paint job, shower wall door panels painted black and a f150 toneau cover trunk lid. He moded the tail light buckets so the '57 lenses would fit in there as he liked the cone in the center. Somewhere i have more pics from when i first saw it, didn't have wing windows then either.
Used Scuff Plate '64 2-door-img_8318asm.jpg

Used Scuff Plate '64 2-door-img_8935sm.jpg
Used Scuff Plate '64 2-door-img_8937sm.jpg
Used Scuff Plate '64 2-door-img_0214sm.jpg
Used Scuff Plate '64 2-door-img_8940sm.jpg
ShotRod64 is offline  
Sponsored Links
Advertisement
 
post #2 of 12 (permalink) Old 07-04-2016, 12:07 PM Thread Starter
Moderator
 
Join Date: Jun 2003
Location: Spanaway, WA
Posts: 21,511
Re: Used Scuff Plate '64 Changed my mind

Think I'll just buy the new ones, hate new shiny stuff but won't maybe won't take long to not be, I'm a weirdo! Mine are actually shiny still just one is crushed.
A guy i know is trying to sell a dual cold air intake thing with K&N filters on the ends, and i told him heck no, too much shiny stuff under the hood then. lol
Similar to this.

Used Scuff Plate '64 2-door-low_profile_dual_plenum_kits.jpg



1964 Galaxie 500XL convertible, 390 .030 over, Fedmogul rv pro-3000 cam

Always be yourself, because the people that matter don't mind, and the ones who mind, don't matter.

http://www.so-calgalaxies.com
http://www.galaxiesnw.com
ShotRod64 is offline  
post #3 of 12 (permalink) Old 07-04-2016, 12:07 PM
Registered User
 
Join Date: Feb 2016
Location: NH
Posts: 337
Re: Used Scuff Plate '64 2-door

I am wicked confused.


1967 Galaxie 500 Edelbrock Intake, Holley 600, Electronic Ignition, Wilwood 4-Wheel Disc Brake Conversion
289Galaxie is offline  
 
post #4 of 12 (permalink) Old 07-06-2016, 11:38 PM
Registered User
 
Join Date: May 2009
Location: Bonney Lake, WA
Posts: 695
Re: Used Scuff Plate '64 2-door

Deb, have you tried the guy up in Lake Stevens that always seems to have an ad on Craigslist? He may have a good used set for you.
https://seattle.craigslist.org/sno/pts/5664532245.html

1964 Galaxie 500XL, 352cid, Cruise-o-matic, 9in rear, white w/white interior, all original american iron as it came from the factory.
1992 F150, 5.0L, E4OD, 8.8in rear
r.n.r.racing is offline  
post #5 of 12 (permalink) Old 07-07-2016, 12:09 AM Thread Starter
Moderator
 
Join Date: Jun 2003
Location: Spanaway, WA
Posts: 21,511
Re: Used Scuff Plate '64 2-door

I'll have to contact him. He has an ad on craigslist a lot also.


Quote:
Originally Posted by r.n.r.racing View Post
Deb, have you tried the guy up in Lake Stevens that always seems to have an ad on Craigslist? He may have a good used set for you.
https://seattle.craigslist.org/sno/pts/5664532245.html



1964 Galaxie 500XL convertible, 390 .030 over, Fedmogul rv pro-3000 cam

Always be yourself, because the people that matter don't mind, and the ones who mind, don't matter.

http://www.so-calgalaxies.com
http://www.galaxiesnw.com
ShotRod64 is offline  
post #6 of 12 (permalink) Old 07-13-2016, 07:12 PM
Registered User
 
Join Date: Oct 2004
Location: Dayton Ohio
Posts: 949
Re: Used Scuff Plate '64 2-door

I will see if I can get you one from the local old junkyard the next time I go there,I know there are a coupe hard tops and one convertible.
junkyardjeff is offline  
post #7 of 12 (permalink) Old 07-16-2016, 06:42 PM
Registered User
 
Join Date: Nov 2010
Location: Douglas, Ga
Posts: 1,065
Re: Used Scuff Plate '64 2-door

Your post is all over the place, so I'm gonna just guess by the title you want two plates where the carpet ends and the door meets on the floor, yes?

If so, if you are willing to use a set from a 63 Galaxie, I've got 3-4 sets.
I'm offshore still but will be back in a week or two.

1976 F100 390/c6
1963.5 Galaxie 446FE/c6
DeepRoots is offline  
post #8 of 12 (permalink) Old 07-18-2016, 11:41 PM Thread Starter
Moderator
 
Join Date: Jun 2003
Location: Spanaway, WA
Posts: 21,511
Re: Used Scuff Plate '64 2-door

Yep you guessed correct, only really need just the passenger side but 63 are probably different so a pair would work to match. Not real picky, not like i'm going to have the doors open a lot nor both at the same time to even see they are different.


Quote:
Originally Posted by DeepRoots View Post
Your post is all over the place, so I'm gonna just guess by the title you want two plates where the carpet ends and the door meets on the floor, yes?

If so, if you are willing to use a set from a 63 Galaxie, I've got 3-4 sets.
I'm offshore still but will be back in a week or two.



1964 Galaxie 500XL convertible, 390 .030 over, Fedmogul rv pro-3000 cam

Always be yourself, because the people that matter don't mind, and the ones who mind, don't matter.

http://www.so-calgalaxies.com
http://www.galaxiesnw.com
ShotRod64 is offline  
post #9 of 12 (permalink) Old 07-18-2016, 11:42 PM Thread Starter
Moderator
 
Join Date: Jun 2003
Location: Spanaway, WA
Posts: 21,511
Re: Used Scuff Plate '64 2-door

Thanks Jeff, all there is here is a 4 door and they are gone. So are the ones on the '63. '62 has or did have them but again a 4 door.

Quote:
Originally Posted by junkyardjeff View Post
I will see if I can get you one from the local old junkyard the next time I go there,I know there are a coupe hard tops and one convertible.



1964 Galaxie 500XL convertible, 390 .030 over, Fedmogul rv pro-3000 cam

Always be yourself, because the people that matter don't mind, and the ones who mind, don't matter.

http://www.so-calgalaxies.com
http://www.galaxiesnw.com
ShotRod64 is offline  
post #10 of 12 (permalink) Old 07-20-2016, 12:14 AM Thread Starter
Moderator
 
Join Date: Jun 2003
Location: Spanaway, WA
Posts: 21,511
Re: Used Scuff Plate '64 2-door

63ford406 has a set for me, thanks all!!



1964 Galaxie 500XL convertible, 390 .030 over, Fedmogul rv pro-3000 cam

Always be yourself, because the people that matter don't mind, and the ones who mind, don't matter.

http://www.so-calgalaxies.com
http://www.galaxiesnw.com
ShotRod64 is offline  
post #11 of 12 (permalink) Old 07-21-2016, 10:14 AM
Registered User
 
Join Date: Nov 2010
Location: Douglas, Ga
Posts: 1,065
Re: Used Scuff Plate '64 2-door

Sorry I didn't get back to you sooner, I've been offshore the last two weeks.

If you still want them, pm me, otherwise, good luck!
Drew

1976 F100 390/c6
1963.5 Galaxie 446FE/c6
DeepRoots is offline  
post #12 of 12 (permalink) Old 07-21-2016, 12:52 PM Thread Starter
Moderator
 
Join Date: Jun 2003
Location: Spanaway, WA
Posts: 21,511
Re: Used Scuff Plate '64 2-door

I think Richard has some for me. Thanks for remembering! I probably would of forgot, it's what I'm good at!


Quote:
Originally Posted by DeepRoots View Post
Sorry I didn't get back to you sooner, I've been offshore the last two weeks.

If you still want them, pm me, otherwise, good luck!
Drew



1964 Galaxie 500XL convertible, 390 .030 over, Fedmogul rv pro-3000 cam

Always be yourself, because the people that matter don't mind, and the ones who mind, don't matter.

http://www.so-calgalaxies.com
http://www.galaxiesnw.com
ShotRod64 is offline  
Sponsored Links
Advertisement
 
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the Ford Muscle Forums : Ford Muscle Cars Tech Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in











Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page



Similar Threads
Thread Thread Starter Forum Replies Last Post
65 Galaxie Door Plate Information Bill M Galaxie Pages 4 11-25-2015 01:31 PM
Door scuff plate screws AdrianS Fairlane Pages 2 11-20-2013 06:20 PM
Problems decoding my door plate Detector Fairlane Pages 8 04-06-2006 05:08 AM
\'67 door plate decode alenhard Galaxie Pages 3 05-18-2004 10:32 AM
Door Sill plate screws AHSOM70 Galaxie Pages 6 05-12-2004 11:04 AM

Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome