Ford Muscle Forums : Ford Muscle Cars Tech Forum

Ford Muscle Forums : Ford Muscle Cars Tech Forum (https://www.fordmuscleforums.com/forumindex.php)
-   Home Porting Cylinder Heads (https://www.fordmuscleforums.com/home-porting-cylinder-heads/)
-   -   FE porting/polishing help (https://www.fordmuscleforums.com/home-porting-cylinder-heads/524394-fe-porting-polishing-help.html)

Killgore 05-05-2013 08:21 AM

FE porting/polishing help
 
I'm gearing up (haha!) to do a revamp on my 73 390 in my f250. I'm a high schooler and have absolutely no budget for aluminum heads (or really any heads) so I'm stuck with the heads I have. I wanted to tackle some porting and polishing (just to match up the ports). Is there any tips that you guys would be willing to share with me? I am wanting the engine to push out about 425-450 ft-lbs of torque and around 350-375 hp

PSIG 05-05-2013 09:53 AM

Re: FE porting/polishing help
 
Welcome. There is a lot of info on the web about porting FE intakes, heads and exhausts. My only contribution right now is to clearly state that "port matching" and "gasket matching" are two completely different procedures. Gasket matching is usually avoided, as it either helps only little, or even hurts flow with factory heads. Unfortunately, a lot of folks confuse it with port matching, or assume they are the same. Stick with port matching.
:tup:
David

TomP 05-05-2013 09:30 PM

Re: FE porting/polishing help
 
Smooth out the lumps in the exhaust ports and taper the large guide bosses down both intake and exhaust. You don't need to removed much material to help power a bunch. On the isecond ntake port there is a lump in the roof and that can be ground into the shape of a boat keel instead of a big dome. If you break through it isn't the end of the world, use a stud with sealer for that rocker shaft.


All times are GMT -7. The time now is 10:22 AM.

Powered by vBulletin® Copyright ©2000 - 2019, vBulletin Solutions, Inc.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.
User Alert System provided by Advanced User Tagging (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.

 
For the best viewing experience please update your browser to Google Chrome