Here is a simple electric fuel pump mount that mounts the old Holley style electric fuel pump underneath a '65 Mustang. I wanted to mount the pump near the fuel tank outlet, but I also wanted to be able to remove it easily for service.
This is the Summit fuel pump that I would be using. It is basically like the Holley red, blue and black fuel pumps. It comes with a mount, but there was not a good place to mount it underneath the '65 Mustang I am working on:
I made a simple bracket from 2" x 1/8" thick angle iron. I drilled the holes that would bolt the pump mount to the bracket, and also the holes that would hold the bracket to the floor. I then welded 1" long 5/16" studs into the holes to make installation far easier than using bolts:
I drilled the holes that would hold the bracket in the floor of the car, the holes would also pass through the fuel tank mounting flange:
The bracket was now bolted to the floor:
The pump is bolted to the bracket:
I installed a filter before the pump because one of the things that will kill an electric pump is trash, so a little insurance now will pay off later:
We now have a simple, sturdy mounting system that is easily serviceable, and looks pretty good.