Ford Muscle Cars Tech Forum banner

Search results

1-20 of 487 Results
Advanced Search
  1. 1964 steering box.

    Galaxie Pages
    The box can be rebuilt, also there is a Allen head stud with a lock nut on it that can be tightened a bit to take out some play if it’s not too bad! The steering box from the 62,63,64 are all the same power steering and standard the different is the pitman arm. I may have one in the back shed...
  2. Post Pics of your Galaxies

    Galaxie Pages
  3. 1965 Galaxie 500 2 door fastback belt line clips

    Galaxie Pages
    Try this place I think it like 30 something pages down. Or the 11 page of trim clips. http://www.rjlautofasteners.com/2014catalog.pdf
  4. How do I swap '63 Galaxie P/S ram and valve for a integral steering box

    Galaxie Pages
    There is a difference in 64 Galaxie pitman arms! The power steering pitman arm and the non power steering one are different. Don’t know if that solve your problem with the geometry but check it out.
  5. C6 swap emergency brake problem

    Galaxie Pages
    I’ve done a 6cyl standard column shift to a 390 C6 swap on a convertible 64 Galaxie. I had to move the trans mount back about 3 inches and that made the front emergency brake cable to short. My question is is there a longer front E Brake cable that can be used? Or has anyone come up with a way...
  6. Galaxie brake conversion

    Galaxie Pages
    I used a 78 LTD for my swap and it worked fine but be aware that some of the swaps leave a positive cantor of +1 or better
  7. C6 trans mount 64 Galaxie conv.

    Galaxie Pages
    Sorry maybe I explained what I need wrong. I have the C6 mount. I’m talking about the crossmember the mount fits on. On a Convertible there is a X brace frame under the car on the hardtops it’s a strait frame. The frame gets narrowed as it goes back and the original spot for the bracket is about...
  8. C6 trans mount 64 Galaxie conv.

    Galaxie Pages
    Having trouble making or finding a trans mount for a 390 C6. Because it’s a convertible and has a different frame. Anyone know of someone who makes it or has any idea on how to make one?
  9. Motor mounts don’t fit

    Galaxie Pages
    Changed it around and the mottos in thanks for your help!
  10. Motor mounts don’t fit

    Galaxie Pages
    Thanks pat I have them holes forward and I’ll switch them up and see if that helps.
  11. Motor mounts don’t fit

    Galaxie Pages
    I’ve got them on the right side but I don’t know if they go holes forward or holes back? If I’m explaining it correctly.
  12. Motor mounts don’t fit

    Galaxie Pages
    Having a problem with swapping a 65 390 into my 64 Galaxie that came with a 6 cyl. I bought 64 390 motor mounts and I have the motor hanging with the driver side in but the passenger side is about 1 inch out and I don’t see how I’m going to get it in. Any suggestions or maybe different mounts...
  13. How do I swap '63 Galaxie P/S ram and valve for a integral steering box

    Galaxie Pages
    I’m doing that to my 64 Galaxie that power steering box is not an easy swap I had to cut my column and do away with the column shift. The box puts the rag joint at the very edge of the firewall with part of it inside the car. I’m still working it out. I’m going from a 223 6 cyl standard 3 speed...
  14. In a bind, need a lil help...

    Galaxie Pages
    62 box is the same as the 63 64 box just different pitman arms. i have a 62 box on my 64 right now.
  15. Newer Ford Rant vs Older Ford

    Galaxie Pages
    OK dont get to mad at me but I have a 204 chevy pickup with a six cylinder and five speed standard on the floor. The clutch pedal is made of plastic (the whole thing) even where it connects to the firewall well needless to say it crapped out on me. Pushed the pedal to the floor and heard a pop...
  16. Dual Master Cylinder Swap

    Galaxie Pages
  17. Dual Master Cylinder Swap

    Galaxie Pages
    If the single jar type was so good and doesnt make a different then why did all the car companies go to it? The same thing goes for disk brakes! i dont even know if you can buy a car without disk brakes! I would like to add that just because you have a dual master cylinder doesnt mean you...
  18. Couple swap questions on 64

    Galaxie Pages
    I used the spindels from a 89 LTD and the master cylinder from a 72 F250 truck for mine but I only did the front brakes and used an adjustable porportioning valve from sumit. I have had a problem with positive camber because of the spindels. So read up on these swaps.
  19. Couple swap questions on 64

    Galaxie Pages
    You need to use the search in the black border as there is a lot of information about disk brakes in this forum. There are many different ways of doing it and many mistakes that can be made.
1-20 of 487 Results
Top