Ford Muscle Cars Tech Forum banner

Search results

1-20 of 56 Results
Advanced Search
  1. Rolling Fender Lips for Tire Clearance

    Body and Paint Articles
    Great write-up Mike. I'll be following your lead shortly. Joe
  2. tuning a holley double pumper

    All Ford Techboard
    i'll ask a question here for my benefit, but maybe the responses will help with the original question. my holley 950 HP idles very poorly. I initially had it too rich and the headers glowed red due to the unburned fuel leaving the cylinders. short of an A/F gauge, what's the best way to set...
  3. 351W Oil Pan Gasket - 94+ same as earlier?

    All Ford Techboard
    I've got the later block and attempted to use Milodon's gasket #40350 on it but the holes at the rear are off. Milodon's only answer is that a 302 gasket may have gotten stuck in the 351 packaging. They suggested I go with a one-piece anyway (their number 41004) but it's only listed for 69-93...
  4. headers supposed to do this?

    All Ford Techboard
    Well, got my own problem fixed, hope this will help some others. I ended up advancing my timing from 8 to 12 BTDC as well as leaning it back to only one turn of the idle screws. No more glowing. Good luck to all. Joe
  5. headers supposed to do this?

    All Ford Techboard
    I've got the same problem with little to offer in advice. I'm carbed and have the timing at 8 BTDC at an idle of around 800 rpm. This would be about right, right? Mine glow red in the primaries. I've got the idle screws out at 2 to 3 turns on this Holley HP. I thought I had identified the...
  6. Air-cleaner base modification

    Induction Articles
    I suppose another option would be the KN filter top.
  7. 67 Tach Hookup with MSD Tach Adapter

    All Ford Techboard
    Thanks guys, I have the linked diagram for the tach adapter, as well as for the 6AL. What i don't get from the instructions for the current triggered configuration of the tach adapter is what wire on the tach to connect to the Ignition Key On wire. Would that be the red one or the black one...
  8. V10

    All Ford Techboard
    i need something to kick my 2000 in the azz! do later V10's have 3 valves?
  9. 67 Tach Hookup with MSD Tach Adapter

    All Ford Techboard
    Usual deal...stock wiring is a mess. I believe I hook the red wire from the tach adapter to the red wire on the tach. Where does the black wire on the tach connect? For some reason i think it does not go to ground. Any experts?
  10. Which intake gaskets should I use?

    All Ford Techboard
    Ok, this is a MUST READ for anybody interested in this topic: http://www.capitalareacobraclub.com/index.php?topic=5095.msg50354 Basically Fel-Pro came out and admitted the base 1262 is no good for street cars.
  11. Which intake gaskets should I use?

    All Ford Techboard
    Guess i'm tossing the 1262's i was getting ready to use this weekend! Here's what I found from Edelbrock: "We recommend Fel-Pro Printoseal gaskets. The use of Permatorque gaskets can lead to improper sealing due to the hardness of the gasket. Don't USE Permatorque gaskets." Source...
  12. How to check if OK to install used airbags

    All Ford Techboard
    Don't know if this helps, but I stumbled across this today: http://www.veryuseful.com/mustang/tech/airBag/
  13. Intake Finish - Natural or Blasted?

    All Ford Techboard
    I heard that too....unfortunately after i blasted mine with "play sand" I wonder if I could re-blast it?
  14. keeping intake manifold clean

    All Ford Techboard
    http://www.fordmuscle.com/forums/all-ford-techboard/intake-finish-natural-or-blasted_58797.html#end
  15. Intake Finish - Natural or Blasted?

    All Ford Techboard
    Cool, I actually like the blasted look alot too. Heck I always have Berrymans on hand...maybe I'll just go that way for awhile.....I can always do something different later.
  16. Intake Finish - Natural or Blasted?

    All Ford Techboard
    Hey Jam, I didn't get that pic. Can you send to [email protected]? Thanks!
  17. Intake Finish - Natural or Blasted?

    All Ford Techboard
    Looks nice and an encouraging experience. OK, i'll be the nubbish that asks....what is a true parker funnel web???
  18. Intake Finish - Natural or Blasted?

    All Ford Techboard
    Great writeup!
  19. Intake Finish - Natural or Blasted?

    All Ford Techboard
    Wow that is one beautiful intake! Not sure I have 80 hours to spend on this before my first outing but the results are great. Hey if you come over to do mine I promise not to get in your way!
  20. Intake Finish - Natural or Blasted?

    All Ford Techboard
    Got them John....thanks. Man you could eat off of that engine of yours! That powdercoating came out looking really nice.
1-20 of 56 Results
Top