Ford Muscle Cars Tech Forum banner

Search results

1-20 of 73 Results
Advanced Search
  1. Head questions

    Falcon Pages
    Well guys im going to look at them today, according to the seller. They have already had the once over by a machine shop with a new valve job and have had zero hours put on them since. Thanks guys, Morgan
  2. Head questions

    Falcon Pages
    Thanks for the advice guys, I think all pick them up this weekend. If I ever choose to go another route with the motor. I will already have a good pair of heads to work off of regardless. Thanks, Morgan
  3. Head questions

    Falcon Pages
    Thanks hepcat, On your AFRs is there a logo or number cast or milled into the heads somewhere to verify that they are AFRs? I just want to know what im looking for when i go to look at them. Thanks,
  4. Head questions

    Falcon Pages
    Found a set of used AFR 165 SBF Outlaw street heads online for 800 bucks near me. For an early 302 engine build, would you guys recommend these heads for the price? They have been completely torn down and rebuild with a fresh valve job. I also found a pair of BOSS 302 heads online also for 600...
  5. My new 1962 Ranchero my daily parts chaser

    Ranchero Pages
    Very slick Chero! How is the T5 swap coming along?
  6. engine swap questions i6-v8

    Falcon Pages
    My .02 would be to gather all the parts needed to do a V8 swap like Ford would have done it. Replying to leaving the I6 parts on the car: Sure smaller parts may not seem as important as say switching from the smaller I6 diff to an 8 or 9 inch, but Ford put the bigger parts on the V8 cars for a...
  7. Drum to Disc Questions

    Falcon Pages
    Thanks guys for the helpfull tips. Ford FTW! -Morgan
  8. Drum to Disc Questions

    Falcon Pages
    My 64 Ranchero is equipped with manual drums on all four corners, with a single master cylinder set up. I have a MP Brakes manual disc brake kit for my 67 Mustang with a dual master cylinder. Its a 4 wheel disc brake set up. 1. Can i use the single cylinder master cylinder with the 4 wheel...
  9. 65 comet headers?

    Falcon Pages
    I don't have any pictures on my computer of the headers installed, I am also away from the car once again down in Tucson. But I can tell you that i did have to punch it in a little bit to clear the steering box, so if the u-joint sticks out even farther, you might be out of luck. You would also...
  10. 65 comet headers?

    Falcon Pages
    try HKR 6901's Jegs number is 520-6901 165.99 + shipping I did have to dent them in in a couple places but for the price, ill live with it :) Oh and it fits a 289 Toploader set up in a 1964 ranchero, cant see a comet being much different
  11. 65 comet headers?

    Falcon Pages
    Look up 6102 hookers on Jeg's.150 bucks shipped to my door.
  12. 1963 leaf springs

    Falcon Pages
    Hello, Your saying that a 1964 Rancheros leaf springs are the same width as a 1965 Mustangs at 2.5 inches? Are they bolt in replacements? So if I for instance bought 1965 Mustang 5 leaf springs, they would bolt into my 1964 Ranchero?
  13. Summit 289 rebuilds

    Falcon Pages
    Valves check. The heads are 65 2 barrel heads, are they 58 CC compression chambers? Any short comings of the early 289 heads other than simple port working to open them up? Would you guys suggest any cam company for cam, springs, lifters the whole shooting match basically for the best bang...
  14. Summit 289 rebuilds

    Falcon Pages
    Thanks for the reply! Yes i would totally have the block and heads sent to the machine shop for a complete tear down and blue-print and balancing. Would you say that it would be worth rebuilding a 69 302 block with ported 289 heads and to stay within a college students bugdet, to reuse the crank...
  15. Comet 4 Speed

    Falcon Pages
    Any updates joe?
  16. vibration at 65mph

    Ranchero Pages
    Had the same problem with my car. It was the transmission mount, it was so old and rotted that the transmission was resting on the steel mount. New mount...no more vibes dude!!! When you check it, look on your tranny for wear marks, it had almost wore through my c4 case cause it rode on steel...
  17. need overdrive for 3spd

    Ranchero Pages
    The first two options that come to mind are... GearVendors Over/Under Drive which bolts to the tailhousing area of your C4 tranny and gives it an overdrive gear for the highway. T-5 5speed swap....
  18. Ranchero Hard Cover (tonneau)

    Ranchero Pages
    The hard top Protect-o-Top that is on my 64 had this steel tag on it: 2122 Ronald Street, Santa Clara California 727-4851
  19. Comet 4 Speed

    Falcon Pages
  20. Summit 289 rebuilds

    Falcon Pages
    While skimming through my toilet tribune (Summit Racing Catalog) I came across the Sealed Power engine rebuild kit that included: Pistons, main cam and rod bearings, brass freeze plugs, piston rings, oil pump, gasket set. They sell a 1963-1968 289 kit that sells for $489. With the 54 CC stock...
1-20 of 73 Results
Top