Ford Muscle Cars Tech Forum banner


  1. Will 69 Mustang Fastback Parts fit on 66 Coupe

    Mustang Pages (1965-1973)
    I have a 66 Mustang Coupe with and I6 and auto transmission that I'm wanting to put a V8 and manual transmission in it. I've found someone that has done a massive upgrade to their 69 Fastback and has removed nearly everything mechanical from it and has the old parts for sale. It has a complete...
  2. 1965 Ford Galaxie Station Wagon - Fuel Filler Door Seal

    Galaxie Pages
    Hello All, I sincerely hope all of you are well and staying safe! I am in search of a fix or a very rare part for my 65 Galaxie Wagon (County Sedan) project. I am doing a complete fuel system replacement/repair and the part I am in need of is a the rubber filler door seal/grommet. This is a...
  3. Automatic to Manual Transmission Switch

    Fairlane Pages
    Hey y'all, I currently have a 1966 Ford Fairlane with a C4 (I believe) automatic transmission. The only thing I don't like about this car is that it's an automatic transmission. Does anyone have any advice on how I can convert it to a manual (looking for what transmissions can fit and what parts...
  4. 1965 Galaxie Country Sedan Fuel Tank

    Galaxie Pages
    Hello, New to this site. I been on it and read a lot good threads and decided I would join. I was wondering if anyone has a fuel tank or knows anyone that might? I have a very, very slow leak in mine. Also, does anyone know where you can get a fuel sending unit? or are they just not made...
  5. 66 7 Liter Brakes

    Galaxie Pages
    I recently purchased a '66 7 liter and have a question about the disc brakes. Does anyone know how to located a set of front disc break hub assemblies? Is it possible to use a hub/rotor/caliper assembly off of a different year/car?
  6. 66 289 engine

    Rebuilt 66 289 engine pulled from my Fairlane a few years back to replace with a roller cam 302. Ran very well, no leaks, no smoke. The engine was rebuilt as part of an amateur restoration shortly before I purchased the car. I had intended to run the engine in the Fairlane after I repaired...
  7. Need 65/66 door courtesy light measurements

    Mustang Pages (1965-1973)
    Hello Mustangs!! I am working on my new door panels for my 66 Galaxie. The new panels I bought have a hole cut out a courtesy light and I am trying to determine if the ones from a 1965/1966 Mustang will work for me as far as dimensions go. There are alot more mustang parts available than there...
  8. 1966 mustang engine swap

    Mustang Pages (1965-1973)
    i got a 1966 mustang. it previously had a v8 and i am plannig on putting a 351 windsor in it. my question is if i can just keep the original harness from the mustang and make it work with the 351w.
  9. 1966 Fairlane 500 new project

    Fairlane Pages
    So I just purchased a 66 Fairlane 500 not a GT. No engine in the car, however I do have a 390 I am going to put into it. There is only one problem I am completely new to this and need help understanding the limitations of this engine/build. i.e. can it be stroked while also having a...
  10. 1967 Mustang or 1966 Galaxie 500???

    The Garage
    Hello folks, here's my dilemma. I have a 67 Mustang coupe that I have had in my possession for about 8 years. The car needs a bit of work. It was a I6 to V8 conversion in process when I bought it. It has a mild 302 from a Mercury Comet (I decoded the engine serial number) that is not running...
  11. 289 Problem please help!

    Galaxie Pages
    I have a 1966 Ford Galaxie with a 289 and back in August one night on my way home from work it started to have trouble running so the next day i went to see what the problem was but it wouldn't start so i took the 2bbl carb off and rebuilt and replaced fuel filters but it still didn't work so i...
  12. 1968-1969 390 Engine - Complete & Running

    Galaxie Swap and Trade
    SOLD SOLD SOLD For sale is a complete and running 390. The engine has 1968 date codes with 390 (C3AE-6090-C heads, 1963). Dress up kit includes chrome air cleaner and valve covers. Edelbrock Performer intake and Edelbrock 600cfm carburetor. Chrome Flame Thrower coil. Brand new fuel pump. RV...
  13. New 66 Galaxie LTD, restoration help in trunk

    Galaxie Pages
    hello all, just bought a new 66 and have a few questions for the brains of the forum. my goal is to restore to as close to original as I can without blowing my budget. The car is about 95 complete, but needs paint, interior help and some clean up in the motor. Trunk is in bad shape, but mostly...
  14. Reproduction Fenders

    Galaxie Pages
    I just bought a 66 Galaxie convertible and I need some new fenders. I've searched all over for reproduction fenders and came up with nothing. Does anyone know where I can get these parts? Thanks!
  15. Front frame rust 66 GT

    Fairlane Pages
    Does anyone know of any reproduction front frame rails for a 66? I just bought a 66 gt that has rust in the passenger side rail. The shock tower also appears to have some rust at the bottom where it attaches to the frame. The frame rust is on the bottom just behind the shock tower and also on...
  16. 1966 Custom 500 Help

    Galaxie Pages
    Hey all, I have a 1966 Ford Custom 500 that currently does not have working turn signals nor reverse lights. I checked my fuses, bulbs, and relays yet nothing appeared to be out of the ordinary and seemed to be in working order. I have flashers but not turn signals, so I replaced the turn...
  17. need bumper, found 2 66 galaxie parts cars

    Galaxie Pages
    i got a nice set of 66 galaxie (non wagon) rear bumper and tail lights. i need a 67 (non wagon) rear bumper along with tial lights. just fyi there are 2 66 gals in western ky thatll be crushed any day now. a 4dr hartop very nice but ive stripped most of it. the fenders in and out, deck lid...
  18. 1966 Mustang Convertible

    Mustang 1965-1973
    ’66 Ford Mustang Convertible $15,500 or OBO [email protected] or 210.269.5857 Serious inquires only, don’t waste my time. Ready to deal Engine: Rebuilt 289-2bbl 4spd Top Loader (serviced by David Key Top Loaders) New 4spd shifter 4-row radiator Dual exhaust New wire...
  19. 1965/1966 galaxie ltd rear bumper

    Im looking for a good/clean rear bumper for a 1966 Galaxie 500. My definition of good/clean is: straight untwisted unwarped bumper with clean chrome, but minor/"hidden" dings/scratches acceptable. I am located in MI 48192. Let me know what you have with some pictures and price. Thanks, -RB
  20. ATTENTION: All 1966 model-year FoMoCo owners

    Information wanted: I am trying to create a list of Ford, Lincoln, Mercury and Ford truck dealerships which were in business during 1966. Most data has been coming from owners manuals with only the dealer name and location (state), which is OK. If you have a list, owners manuals, or additional...