Ford Muscle Cars Tech Forum banner

351

  1. 302w or 351c for 64 falcon

    All Ford Techboard
    hi everyone my name is Jarod and I am almost 16. I got my first classic a 1964 falcon 2dr sedan. I love it but the stock 170ci i6 makes only 100 hp gross. I just think that's to low for me. I have two engine to choose from a 302 Windsor or a 351c both 2v versions. I have a limited budget so I...
  2. 1961 Falcon--My First Build

    Falcon Pages
    Ok, so I am going to be picking up my new car tomorrow, it is a 1961 Falcon. I am going to start with upgrading the suspension and brakes, but then I want to put in a SBF and I have no idea which one to use. My buddies want to see a 302 go in it, and they will be helping so I must take their...
  3. 1971 Flywheel

    Mustang Pages (1965-1973)
    Hello. I am working on a 71 mustang with a 351C 4-speed. It has been in pieces for years and i have lost my Flywheel. I was hoping somebody on here could tell me where and what to get. It took the 11" clutch and the bellhousing has the part # D1TA 6394AA. Any help on this would be great...
  4. 351w to 428 stroker

    Stroker Engines
    I have a 1974 351w block that i plan on boring .030 over. What stroker kit(looking at a 428 from Ford Engine Kit - Ford 428 Stroker Kit, 351 Windsor Big Bore Flat Top) would you recommend. Also what heads, cam, ect should i be looking at. Any recommendations as to what i should do with this engine.
  5. 351w in 1969 Falcon. What do I need?

    Falcon Pages
    hey guys. I currently have a 302 of an 85 mustang and a C4 transmission. I wanted to build a stroker and eventually put a supercharger with low boost on it so I was looking into having a 363 Dart block build from Fordstrokers but seeing the pricing it looks like I would be much better off...
  6. WTB: Forged Crank

    Wanted
    Looking to purchase a forged crank for a 351 Windsor. Preferably located near me in Central Texas. Thank you.
  7. 351 camaro swap

    All Ford Techboard
    Hi I'm a ford guy who's stuck with a fourth generation camaro. I have already put lots of money and time into it besides just the engine but am finally fed up with it. By selling it I will be losing lots of money so I am interested in doing a ford swap to put a 351 into it. The transmission is...
  8. 351 and 302

    All Ford Techboard
    I have a 302 currently in my 84 mustang. I also have a 351. I have no idea if it is a windsor or a Cleveland or a modified. I heard about the way to tell if its a windsor or cleveland by if it is a windsor it will have 5 bolt pattern on the valve cover and an 8 if its cleveland. How do i tell if...
  9. 351 and 302

    All Ford Techboard
    I have a 302 currently in my 84 mustang. I also have a 351. I have no idea if it is a windsor or a Cleveland or a modified. I heard about the way to tell if its a windsor or cleveland by if it is a windsor it will have 5 bolt pattern on the valve cover and an 8 if its cleveland. How do i tell if...
  10. 351W & C6 trans.... worked

    Engine
    :tup: 351W .030 ,Dart iron heads,mild porting,SS valves,Crane roller rockers,Fluidampner,Lunati flat tappet 554 lift,Comp push rods,crower rods,CSR elec water pump,Melling oil pump,Mallory dist,Ford Motorsport alum intake,650 carb, C6 trans w/3500 stall,transco shift kit,and a B&M pro stick...
  11. 351 Cleveland questions

    All Ford Techboard
    Ok this is what is going on, I am rebuilding a 351 cleveland, I have a four bolt main block from a '72, I have pistons from a '72 with a dish in them and I am putting forged flat top pistons in with the stock (apparently '70) 4v closed heads which will hopefully result in a compression ratio of...
  12. R&C MII front end in 64 comet what headers fit?

    Falcon Pages
    I have a 64 comet with the Rod and Custom mustang 2 front end kit. We are installing a 408w in it and would like to know what headers actually fit with out modification. Has any one actually gotten long tube headers to fit and what was the part # or application?
  13. This 302 has me tweeking!

    All Ford Techboard
    Hey guys name is Bret. Ive been a Ford guy all my life and have a few Ford projects in the works. I have a 1946 ford Hot Rod 90% built a 1968 F100 Ranger with a 460. Just picked up a 1968 302 2v for $200. I was told it was pulled from a 1968 Mercury Cougar with 50,000 miles. I was skeptical...
  14. Running Engine on stand

    All Ford Techboard
    I just finished rebuilding my 351C. I built an engine stand to run it on. This is my first engine rebuild and the first time I will be putting one on a stand. I was wondering if any of you could tell me what I need on the engine to run it. Here's what I have on the engine now; I'll start...
  15. need help with a 1950 ford custom

    Street Rod Forum
    I have a 1950 ford custom and i want change it from a flathead v8 to a 351 cleavland. I was wondering if a c6 trans would fit? Also what year 9" rear end would fit?
  16. 1991 GT timing/ rev issue; sounds retarded

    Mustang Pages (1979-1995)
    hey guys, Wrap yer brains around this and lets figure it out....91 gt, 351, efi, all stock ignition except for a 140amp alt and a performance distributors tfi module. I have a comp cams extreme energy cam with a 532 lift/ 232 duration so it's fairly lumpy. When all is right the cam is very...
  17. Fuel Injection on Torino?

    All Ford Techboard
    I have a 69 Torino with a 351 Cleveland. I have been looking at these Holley and off brand fuel injection systems to replace my carburetor. I use the car as my daily driver so I'm sure you would understand why I want to switch. I am wondering if there is a system I could get off a used vehicle...
Top