Ford Muscle Cars Tech Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 44 Results
  1. Galaxie Pages
    1968 XL 390 convertible. It has the C-6 automatic with a 9". It's a pretty complete car missing only a few pieces of trim. It does have some rust in the rear fenders but the floors and trunk appear to be in good shape. Most importantly, the frame appears to be nice and solid with only the...
  2. Galaxie Pages
    I know there’s a bunch of threads on this kind of thing but I haven’t had any luck. It’s my 1966 LTD that I swapped a 390+c6 into. Prior to that, i was running a toploader in it. At the time, It rode like a dream on the highway. Now with the c6, I’ve noticed it feels like all the tires are out...
  3. Galaxie Pages
    Hi Ladies and Gentlemen, I'm looking for a little help on some questions about axle identification. But first a little background on the car. I bought a 1963 z code galaxie project in 2013 as a 30th birthday gift to myself. I actually went to investigate a 1961 Starliner but that proved to be a...
  4. All Ford Techboard
    The harmonic balancer is off my 1968 390, which is out of the car, and I noticed when I was cleaning it up for paint, that the inner ring is sticking out the radiator side slightly, right at .0125/1000ths, or 1/80th of an inch. I did not notice anything else wrong with it, the rubber isn't...
  5. 68 XL Galaxie

    The beginning of what I suspect will be a never ending project.
  6. All Ford Techboard
    I have a 65 Ford Galaxie with a 390 from a 68 f250 (I believe) it’s got a 67 autolite 2100 carb on it and I just rebuilt it and put it on but the base gaskets I’ve found locally for the 2100 carb are paper thin but you can get the thicker style base gaskets for the 2150 I know the 2150s base...
  7. Galaxie Pages
    I just purchased my first Galaxie. Its a 1968 XL with 390 2v motor. Id like to know more about how rare it is etc. I have the original build sheet and sales contract. Im planning a complete restoration so would be nice with some info from those in the know. Any advice on researching my...
  8. Galaxie Pages
    Any issues with these pieces going together? Block: - Came out of a 1973 Dually - 390 FE = Mirror 105D3TE = 1973 Truck Heads: - Truck heads - #D2TEAA / 203 / 4E2 - (1972 I believe) Pieces from another 390 FE Block (352 31) : - Pistons(C6AE), I will get it bored out to fit the .30 over -*Crank...
  9. Galaxie Pages
    1967 Galaxie 500 2Dr Block = FE 390 - #816 (4/16/1968 I believe) Heads = Truck heads - #D2TEAA / 203 / 4E2 - (1972 I believe) Intake = Truck Intake - #7F13 / C7TE 9425-E - (1967 I believe) Problem: When I received this car, there was water in the oil. Engine is now out of the car...
  10. Mercury
    1967 Mercury Comet Cyclone GT390 for sale. California car located in San Jose area. Bought the car a few years back and never got around to working on it. Car is an original GT390 but previous owner put a 351 Cleveland and an auto 4sp tranny. (WHY!?!) Car was running a couple years back should...
  11. Truck Forum
    Help! My truck sat for 10 years. rebuilt it with my son for him to drive and it has become a nuisance. First fuel pump lasted 12 minutes. was old. no problem. 2nd pump went 2 months. figured it was just Chinese junk. has eaten 5 more since. total of 7 in 3 months. flushed the tank with...
  12. Galaxie Pages
    Hi! New to the forum so I'm sorry for this. I genuinely have searched man times for aluminum radiator information on here without having registered and thought maybe i just wasn't getting good results due to not being a member. Maybe I'm just having difficulty with the thread search. but either...
  13. Truck Forum
    My 1964 Mercury Montclais has the 2 barrel 266 hp big block FE engine. The car has sat for twenty years, since July of 1986. I've only had it a week. I started it up Saturday, 2 days ago, and I heard what I thought might have been piston rings scraping on the drivers side of the engine. But when...
  14. Galaxie Pages
    Hello All, New to here and new to owning a Galaxie convertible 390 4bbl. Just purchased this weekend and I would like to know about installing rear seat belts? I know there are generic belts i can buy, but are there holes already under the rear seat to bolt them too? or can i just drill and...
  15. Mercury
    2 door Y code rolling shell basically. Missing engine, trans, hood, grille, front seats and steering column. The body is very straight, but it has rust on lower front fenders, front floorboards and lower rear quarters. All of the glass is in good shape, doors are rust free and straight. It is...
  16. Galaxie Pages
    Does anyone have experience with this product from Motofeet? Motofeet Engine Stand for Ford FE - Century Performance Center It looks sturdy and I like the simplicity of it. I believe the motor mounts on my '64 352 use two bolts per side, while the '65 and later used 3 bolts per side. If the...
  17. Truck Forum
    Hello. I joined the forums to ask about a leak I can't figure out. ____ My 360 FE: Stock Rebuilt - 12 months ago - stock .030 over [just for clean-up] 76 AA heads [for valve seats] Edelbrock 390 Performer - Holley 4-barrel - Headers [for airflow] Stock cam / Crank - Not a hot-rod ____ I...
  18. Galaxie Swap and Trade
    I am selling a 1966 390+•030 assembled short block with heads. Both are from a 66 T Bird. The heads are untouched except for being cleaned a checked. Forged pistons, ARP Rod Bolts, Oil passeges gone through for typical FE issues, Crank cut .010 on rod n main journals...No cam and set up for...
  19. All Ford Techboard
    :confused: Hi everyone, I am replaceing the cam in my '69 Mach 1 S code, I put this cam in about 20 years ago and I can't remember the specs or even the make. I would like to replace it with the same exact cam because it works perfect. The only markings on the cam are : On the end opposite the...
1-20 of 44 Results
Top