Ford Muscle Cars Tech Forum banner

393w

  1. Windsor Sr heads ok for a 393W stroker?

    Stroker Engines
    I'm thinking of building a 393W stroker as I acquired most of the necessary pieces from someone who needed cash. So far I've got a '74 Windsor block - std bore, an Eagle 3.80" crank, set of stock refinished rods, and the correct Probe pistons for this combo. Also came with a set of Windsor Sr...
  2. 393W with 6-71, what do you think?

    Stroker Engines
    Ok I read all the time but never post so here goes. I am putting together a street/limited strip stroker for my 3700lb 47 for pickup(truck is running a C6 and 3.50 gears). Here's what I have: 74 351w block 0.030 over Scat cast steel 3.85 crank Scat h beam rods stock length Probe SPS 30cc dish...
  3. Vacume secondary carbs

    Stroker Engines
    I have a 351w about to be turned into a 393 stroker that is used for circle track racing. It's already bored 30 over. This past race season was my first ever. I have to use a vacume secondary carb on there and I had an 850 on there with really big jets in it. The Motor was very laggie on the...
Top