Ford Muscle Cars Tech Forum banner

ford

  1. '70 Torino 351c fuel delivery issue, please help!

    Torino Pages
    Ok so I have a 1970 Torino 351 Cleveland and upgraded the top half from a stock 2bbl to 4bbl Eldlebrock 650 carb and intake manifold. Ever since then I've been creeping up on small issues. I have some bad compression in 2 valves so I just have her sitting, probably for way too long since I don't...
  2. 63 Galaxie 352 Oil

    Engine Articles
    I Have a 63 Galaxie 500 with a 352 in it. Doesn’t seem like it’s ever been rebuilt but I just want to run the right oil in it. Currently run Mobile 1 10w-30 with a Rislone Zinc additive but I heard there are some better oils to run for and old engine. Any suggestions would be appreciated..
  3. 63 Galaxie brakes sticking on

    Braking Articles
    I have a 1963 Ford Galaxie 500 with drums all around. Has a new master cylinder but after a 10-15 mile drive the front and rear brakes stick on. Jacked it up and can’t spin fronts at all until opening a bleeder than they will free spin. Thinking maybe master cylinder push rod length out of...
  4. NMRA posts 2020 Event Scedule

    Drag Racing
    The 2020 NMRA event schedule has been posted with the only change being the date for the St.Louis race. It is the end of May in 2020. Here is the complete schedule. February 27-March 1, 2020 26th Annual NMRA Spring Break Shootout Bradenton Motorsports Park (Bradenton, FL) April 2-5, 2020...
  5. 1965 Ford Fairlane 500 Transmission Crossmember

    Transmission Articles
    Hey, guys, I'm new to the site and I am wondering if anyone knows where I can get a '65 Fairlane Sport Coupe 500 transmission crossmember. I've searched all over and can't seem to find one. Any help would be appreciated.
  6. Ford Performance Fuel Pressure Gauge 2017 GT Mustang

    Interior
    $200 Ford Performance Fuel Pressure Gauge new in box. For Mustang GT 2017.
  7. Stunning Performance and Control: 2020 Shelby GT500

    All Ford Techboard
    2020 Shelby GT500 Achieves Supercar Acceleration with 760 Hp and 7-Speed Dual-Clutch Transmission.
  8. 1957 Fairlane 500 E code

    Fairlane Pages
    Hello, I noticed a Fairlane for sale out in the country and stopped by to take a look. it was an older gentleman selling it saying he didn't want it anymore. I took a couple of pics and drove back home telling him ill call him and give him a price. i came home and decoded the vin and found out...
  9. '78 bird/cat project

    Thunderbird Pages
    Alright boys I'm finally posting here for help. Time to lay it all out for you.:frown2: I've owned a '78 XR-7 for about 6 years. 65k all original miles, 351w, FMX trans. Everything is stock except for an air cleaner upgrade, a new radiator, the plugs/wire kit I put on, a distributor, and an OEM...
  10. what rear end size for a c5

    C4 Transmissions
    i have a 66 fairlane with a 302, a c5 , and a 2.80 rear end, the motor is built with a cam, exhaust, carb, intake, i also have a shift kit and a high stall converter. i want a 3.23 rear end but i can only find 3.55 for ford 8 inch rear axles. what rpms would i be at on the freeway at 70 with...
  11. Grille Support - LH & RH - 1964 Ford Galaxie

    Auto Metal Direct
    Now available - Grille Support - LH - 1964 Ford Galaxie Part# 151-8964-L Retail price: $24.99 Grille Support - RH - 1964 Ford Galaxie Part# 151-8964-R Retail price: $24.99 Reproduction grille support bracket for the 1964 Ford Galaxie. Stamped from high quality heavy gauge steel on our...
  12. Grille to Bumper Filler Panel - 1964 Ford Galaxie

    Auto Metal Direct
    Now available - Grille to Bumper Filler Panel - 1964 Ford Galaxie Part# 115-8964 Retail price: $189.99 Reproduction grille to front bumper filler panel. This piece fills in the opening between the bottom of the grille and the top of the front bumper. Stamped from high quality OE gauge steel...
  13. *New Parts* - 1963 Ford Galaxie Trunk Gutters

    Auto Metal Direct
    Now Available - Trunk Gutter Set (3pcs) - LH - 1963 Ford Galaxie Part# 825-8963-LS Retail price: $169.99 Trunk Gutter Set (3pcs) - RH - 1963 Ford Galaxie Part# 825-8963-RS Retail price: $169.99 Reproduction 3 piece trunk gutter sets for the 1963 Ford Galaxie. These pieces attach to the...
  14. Cross Rail Brace - Rear - 63 Galaxie

    Auto Metal Direct
    Now Available - Cross Rail Brace - Rear - 63 Galaxie Part# 871-8963 Retail: $149.99 Reproduction rear cross rail brace for the 1963 Ford Galaxie. Often badly rusted, bent or missing all together, this brace installs at the rear of the frame and sits just behind the back bumper. Each brace is...
  15. Trunk Floor Cross Brace - Rear - 61-64 Galaxie

    Auto Metal Direct
    Now Available - Trunk Floor Cross Brace - Rear - 61-64 Galaxie Part# 870-8963 Retail: $149.99 Reproduction rear trunk floor cross brace for the 1961-64 Ford Galaxie. Made like OE, this cross brace welds to the bottom of the trunk floor, on the rear edge. Stamped from high quality OE gauge...
  16. Wheel size for 1964 Falcon

    Falcon Pages
    I have a 1964 Ford Falcon Sedan, 2-door, 6 Cyl. 170 straight, 3 speed tree Manual Transmission and Brakes. My wheel is 13” (Rim diameter), Rim width is 4”, Backspacing; I don’t know bcuz tire is on wheel, 4 lugs (Bolt pattern measurement is 4.5”). My tire size is P185/70R13. I need one wheel...
  17. Help buying 1963 galaxie, also tell me all about them

    Galaxie Pages
    Hi everybody! So i'm looking for a Galaxie 1963 ''kombi'' The thing is that i have no idea what to search for since from what i've seen there's several names for it? Such as, 500, 500 Xl, country sedan, galaxie, country squire etc... I am looking for a 1963 Ford Galaxie kombi. I hate to use...
  18. Ford 302 HEI distributor spark issues

    All Ford Techboard
    I am in the process of converting my 1977 ford 302 to a HEI distributor (I broke the original and thought the HEI would be a slam dunk). I thought it might be the voltage drop so I wired directly to the battery. I have 13v with key turned to run and 11v while cranking. I have checked the spark...
  19. Ford 8.5 Rear End

    Galaxie Pages
    I have a 1969 Ford XL Fastback with a 302 2bbl and a 3 speed Toploader column shift. Does anyone have any information on the Ford 8.5? Based on my diff tag and the info on the door, I have a Ford 8.5 with 3.10 gears. What are my options for gears, posi, etc. During my research, I found that...
  20. Radiator Overflowing At Normal Temperature..

    Ranchero Pages
    1971 Ford Ranchero 302 (1970s block, stock internals.) Auto 3 speed. So today i went and got a new rad cap, hoping this was the problem. I jacked the front end up and filled it up with coolant to the cold line. Started the car up and let it warm up with the cap off. No issues/bubbles/spraying...
Top