Ford Muscle Cars Tech Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-19 of 38 Results
  1. Galaxie Swap and Trade
    I'm working on cleaning the garage after my Galaxie project and found the springs pictured below. These are brand new stock height, front coil springs from Eaton that were not used after a miscommunication on my end. They are part number MC1350: stock ride height for FE & Auto trans without A/C...
  2. Galaxie
    1962 Galaxie 500 - Custom Paint (blue with orange, yellow flames). Gray interior, 2 door. Purchased Aug 2021 Streetside Classics Atlanta. Ceramic coating (March 2022) with 9 year warranty. Engine - 65 Thunderbird 390cc Manual transmission- 4 speed floor New front tires, front brakes. Upgraded...
    $24,900 USD
  3. Galaxie
    1963 Ford Galaxie 500 XL, Convertible. Engine Startup: Excellent condition. Droptop convertible. Barn kept and rarely driven. 47,000 miles on odometer (unknown actual). Black exterior. Black interior. Engine = 390 V8 (rebuilt, S-code). Automatic transmission (rebuilt). Power steering. Power...
    $26,500 USD
  4. Galaxie Pages
    Hi, I’m an owner of a 67 galaxie 500 fastback, original 289 c4 car, but I’m somehow putting a Detroit 4-35 diesel and an Alison 540 or a beefed up c6 trans in it. It’s going to get a lift with 31 inch tires, and I was looking to see if there was any safe way to lift the car, maybe 8 inches or...
  5. Galaxie Pages
    I have been working on my 66 Galaxie for a while and have had quite a bit of an issue with the fuel system. After trying to track down the issue using these forums I decided to look at the carburetor for the first time and after inspecting it, it seems that there is something missing and I don't...
  6. Galaxie Pages
    Good Afternoon, Y'all, I finally got my carburetor off the '67 Galaxie, to figure out why it won't budge. Turns out the Throttle spindle was wedged in there pretty tightly due to filth, and in the process of removal is now damaged. I'm trying to find a proper replacement for it, any...
  7. Galaxie Pages
    Good morning, all, My 1967 500’s frame was worse than I initially expected the torque boxes and frame rails are all compromised. I’m trying to find an aftermarket solution, however I’m having difficulty locating one. I’ve located a galaxy frame in Tennessee,However I’m concerned about the...
  8. Galaxie Pages
    Good afternoon, y’all, i recently bought a 1967 Galaxie 500 that had been sitting in North Carolina soil for 5+ years. I got all but the passenger rear drum to move properly, but that last wheel refuses to move. I’ve used the spoon tool to hit the star wheel to the point that the bottom of the...
  9. Interior Articles
    Hello there everyone So I took the plunge and bought my first 1968 2 door Galaxie and super excited to start working on it. So I found a donor car 1966 4 door Galaxie, I'm going to use the frame to swap out because they are the same size. My question is are the bench seats compatible, could I...
  10. Galaxie Pages
    Hi, I had bought a heater core for my 65 galaxie 500, im stuck on what else to do or parts to get. I have the cover of the firewall and thats basically it. This has been my project car for about 3 years now, and trying to recover parts and get it back to original and complete. Little history...
  11. Galaxie Pages
    Hi all, First time on the forum, hopefully this question hasn’t been asked already. Looking for an updated (am/fm, bluetooth?) radio that appears stock to go in a 65’ Galaxie 500 XL. So far, at least from the forums on here and general internet search, I haven’t been able to find 65/66. There...
  12. Transmission Articles
    so I have been working on my 1965 Galaxie 500 2 door fastback that I just got running for the first time since 1990 the car originally came with a 352 4 barrel and an Mx transmission was told by the last owner that it was originally a c4 transmission but he said the motor started smoking so he...
  13. Braking Articles
    I have a 1963 Ford Galaxie 500 with drums all around. Has a new master cylinder but after a 10-15 mile drive the front and rear brakes stick on. Jacked it up and can’t spin fronts at all until opening a bleeder than they will free spin. Thinking maybe master cylinder push rod length out of...
  14. Galaxie Pages
    Hi, I've been trying to figure out the problem with my brake lights and have come to the conclusion that I don't really know what I'm doing. The running lights do work, so the bulbs seem to be in working order. I changed out the brake light switch with no difference in result. I've cleaned the...
  15. Galaxie Pages
    I'm new to site and I recently bought a 1970 Galaxie for a street rod. I just want to build a cool car whether or not it a show car or not. I will be updating this thread from time to time. I welcome all questions, suggestions and criticisms as well. An now the car. I picked this up on...
  16. Galaxie Pages
    Just recently acquired this '65 gem. Has 460ci. 580h edelbrock cam, performer intake, Holley 4150 carb. TCI C6 Trans. Body needs work, but hey, I got a good deal. Shooting for a total tear down/rebuild.
  17. Galaxie
    I have my 1966 Galaxie convertible for sale. The car needs to be put back together and motor put in. I have over $12,000 invested and willing to sell or trade for a Jeep Wrangler. The reason for selling is because I am moving to Colorado in the mountains and this car would not work well for...
  18. All Ford Techboard
    Hi there. I have a 64 Galaxie 500 coupe, the engine was replaced and was told it was a CJ, but I'm not convinced, since I was finally able to get the #s of the block. They are: D1VE 6015 A The cyl. head # is: D0VE - C Please help on figuring it out. Thanks guys! -FDC
  19. Galaxie Pages
    Hi all, I have a '66 Ford Galaxie 500 with a 390 engine and it keeps stalling in 2 different circumstances from what I can tell. Basically heat and road inclines seem to cause the stalling. It's very frustrating and I'm afraid to take my kids in the car because of it. I'm a computer guy and...
1-19 of 38 Results
Top