Ford Muscle Cars Tech Forum banner

ignition switch

  1. Falcon Ignition issue

    Falcon Pages
    new starter solenoid, plugs, and ignition coil. Turn the key nothing happens... zero... not a click just turn nothing. I can make the engine turn over at the starter solenoid by basically doing a hot wire which I should not be able to do while the key is in the off position right? . Though I...
  2. mustang 98 won't turn off and won't crank

    All Ford Techboard
    came to the car turned it on and notice that the car would not turn off and the ignition lock seemed loose i pull the key out and the car is still running, i removed some fuses, this shut off the car, when i put the fuses back in the car, it is automatically on, not running but on and without...
  3. Turned key to start, everything's dead: Bad Starter Switch or...?

    All Ford Techboard
    My falcon's been sitting for a couple weeks while I fixed a leaky exhaust manifold and did a little wiring work. Wiring still in-progress, but wanted to check the exhaust leak. Things were fine in the "ON" position, but as soon as I kicked it over to "START", it everything went dead. No starter...
  4. Turned key to start, everything's dead: Bad Starter Switch or...?

    Falcon Pages
    Edit: Reposted to All-Ford Tech, as it's not necessarily Falcon Specific My falcon's been sitting for a couple weeks while I fixed a leaky exhaust manifold and did a little wiring work. Wiring still in-progress, but wanted to check the exhaust leak. Things were fine in the "ON" position, but...
Top