Ford Muscle Cars Tech Forum banner

megasquirt

  1. Megasquirt fan control

    Late Model EFI Techboard
    Sure would be nice if this works... I have a DIYPNP that I need to control an aftermarket two-speed/single fan with in a 93 Mustang. I have the fans controlled by two separate relays that are energized when ground is applied. When either single relay is energized by itself, the fan is on...
  2. Megasquirt fuel load % at idle

    Late Model EFI Techboard
    I have a 331 with aluminum heads, performer rpm intake, comp xe274xe (224/232 @ .050 & .555/.565), 24lb injectors, and 75mm tb. I programmed a DIYPNP on my own fox body, plugged it in, and it runs but needs tuning, I haven't driven it much but noticed that it idles at around 65% fuel load. The...
  3. NEEDED: AODE / 4R70W electronic info (transmission)

    All Ford Techboard
    Many of us are - or are wanting to - retrofit the 4R70W/4R75W electronic-control transmissions (and other Fod trannys) to an older chassis providing substantially greater strength, more speeds, lower gear ratios, overdrive, and lockup converter, all on-demand. :D If going carbureted...
Top