Ford Muscle Cars Tech Forum banner
1 - 4 of 4 Posts

·
Registered
Joined
·
3 Posts
Discussion Starter · #1 ·
I'm trying to replace the heater hoses on my 1963 falcon with the new silicone hoses. The heater hose tubes do not extend thru the firewall and I can't see them from under the dash. Does anyone know what is involved to get to the heater core hose connections
 

·
Premium Member
Joined
·
1,297 Posts
I'm trying to replace the heater hoses on my 1963 falcon with the new silicone hoses. The heater hose tubes do not extend thru the firewall and I can't see them from under the dash. Does anyone know what is involved to get to the heater core hose connections
I think you have to drop the heater box down. Be sure to get the special hose clamps for silicon hose. Regular hose clamps will chew up the outside of the hose as you tighten. https://cdn11.bigcommerce.com/s-c12..._clamps__35852.1359827015.jpg?c=2?imbypass=on Not recommending anywhere specific.
 

·
Premium Member
Joined
·
1,297 Posts
No sorry I don't but if you have carpet you may want to remove for the job. You may want to check suppliers of Falcon specific parts for heater box the body seals.
 
1 - 4 of 4 Posts
Top