Ford Muscle Cars Tech Forum banner

1 - 6 of 6 Posts

·
Registered
Joined
·
4 Posts
Discussion Starter #1
Hello. I am working on a 71 mustang with a 351C 4-speed. It has been in pieces for years and i have lost my Flywheel. I was hoping somebody on here could tell me where and what to get. It took the 11" clutch and the bellhousing has the part # D1TA 6394AA. Any help on this would be great!

Curtis
[email protected]
 

·
Registered
Joined
·
10,307 Posts
Correct. The D1TA bellhousing indicates it is 164T, 28 oz/in balance, and 11" clutch. Most any 289/pre-1980 302/351W/351C flywheel will fit and run, but the 351W/C flywheels are made for 11" clutches (some smaller engines and a few 351s are 10.5"). Ford Racing has them new (~$260), and online sites are 1/2 of that price, but a replacement stock flywheel (such as this) will do fine if you're not revving higher than stock. More searching may find a better price, but remember, shipping charges kill it. Good luck!
:tup:
David
 
1 - 6 of 6 Posts
Top