Ford Muscle Cars Tech Forum banner

1st and 3rd work but 2nd slips

1010 Views 1 Reply 2 Participants Last post by  ckelly
Went to the track with my frsehly rebuilt tranny and the first couple of passes everything worked fine. Then my tranny brake wouldn't hold it on the line and when I went to second the car hit the rev. limiter so I shifted to 3rd nd it went in there fine. I have a 393 YSI vortech blow through carb setup going through it.
1 - 1 of 2 Posts
Might be something with the intermediate band and/or servo.
1 - 1 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.