Ford Muscle Cars Tech Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
582 Posts
Discussion Starter · #1 ·
I have a 302 Mexican block and I would like to build it into a 331 CI motor. I would like to get between 400 and 450 HP with FI. Any ideas on a good combo. for this motor.

Thanks













_________________
67 Mustang Fastback w/351-C and 5 speed
34 Ford 3 window coupe 5.0 AOD

<font size=-1>[ This Message was edited by: coupe3w on 2/11/02 1:47am ]</font>
 

·
Registered
Joined
·
1,929 Posts
I built one last year. Runs real nice. I used a kit from Coast Highperformance. It requires notching of the bores for rod clearence. Other than that it goes together like a stocker.
Cat makes cranks that are available in either cast or forged, as well as the rods.
catpep.com
Keith Black makes a forged and hyper. piston for this combo as well.
As far as the heads go, the AFR 185's with a 58cc chamber will do the deed.
What type of cam do ya want to use?
For the F.I. combo, I'd move up to the 24lb. injectors and a Performer RPM intake.

<font size=-1>[ This Message was edited by: 85Mike on 2/11/02 2:47am ]</font>
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top