Ford Muscle Cars Tech Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
237 Posts
Discussion Starter · #1 ·
who makes a good low compression forged piston for a stock stroke 351W. i know TRW makes some and they are probably the cheapest. can someone give me the part numbers. i would also like something that would clear my 2.02/1.6 valves. will the dish in the trw pistons clear these valve? i wont be running very high lift. i want this for a blower setup so i want low compression with a 60cc head, and id like to keep the cost down as much as possible. any suggestions
 

·
Registered
Joined
·
1,929 Posts
I'd step into the modern world. TRW's will work, but they are old tech and heavy.
SRP makes a piston with a 24cc dish that yields a 8.9 comp. with your 60cc head. The .030 over # is 138722. Weight is 521 grams. You should be able to buy these for less than $450.
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top