429 in a 68-f100 tranny ??? | Ford Muscle Cars Tech Forum

1 - 1 of 1 Posts

roush_racer22

·

Registered

Joined Jul 22, 2012

·

3 Posts

Discussion Starter • #1 • Jul 22, 2012

i took a 429 thunder jet out of a 71 Thunderbird i want to put my std tranny on the motor but im unsure what bell housing and flywheel will work i have a new flywheel clutch preser plate of a 80 460 or i have a 390 clutch flywheel bellhouseing and i have a 400m bell houseing will any work on the 429 and is it balanced different ? im doing this swap in a 68 f-100 the 429 has a c6 behind it but i have a wide ratio 4 speed i would like to use

1 - 1 of 1 Posts

Join the discussion

Recommended Reading

1980 f100 frame swap

Truck Forum

Hello all, I'm new to the forum and I have recently accepted a build off challenge. The challenge is a street legal vehicle build and will include a quarter mile drag race as well. Kind of a friendly build off but I have decided on a memorial truck of the first truck my grandpa and me built. The...
- 0
- 59
- Jay.bro · updated 11 days ago
Can anyone post a dyno sheet for a 400 or 408?

Truck Forum

Last month when a main bearing started knocking over 3K rpm's, we pulled our 351M out of my son's 76 Ranchero and got it rebuilt and upgraded with a few choice items. I know the stock 351M in our 76 Ranchero was a low-compression smog monster and did not make much power from the factory. From...
- 2
- 240
- 6
  65FalconSix · updated 3 months ago
1967 f100 radio schematic

Truck Forum

Hello, I need to repair my radio, 1967 ford trucks have a unique “one year only” radio. I’m not having any luck finding a schematic from any of the dealers who sell them. The only number stamped on the radio is BTL308164 Thanks
- 2
- 157
- M
  Martinautobody · updated 3 months ago
4R70W problem in a 1999 F150 4.2

Truck Forum

I posted this in the F150 forum 2 days ago. I have had 168 views and no responses, so I try here too. My son has a 1999 F150 4.2 RWD with 4R70W. It has 210K miles. It takes 5-10 seconds to go into drive. It goes into reverse immediately. It shifts good 1-2, 2-3, 3-OD. Downshifting is good...
- 2
- 178
- 6
  65FalconSix · updated 6 months ago
1960 F350 Restoration Project

Truck Forum

I’ve got a 1960 F350 with a 223 cu in 3.7L I6 that was my great grandfather’s that my father recently brought home from my grandfather’s backyard where it sat for 18+ years. The original goal was to restore it as much as possible but I’m looking for another opinion because I’m in a bit of a bind...
- 3
- 287
- F
  FredF350 · updated 7 months ago

Join now to ask and comment!

Top