Ford Muscle Cars Tech Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
29 Posts
Discussion Starter #1
thought some of you might be interested in these threads.
some very good low buck info, and some general info for those interested.
http://www.network54.com/Forum/message?forumid=85220&messageid=1013571179

and a low buck piston for a 528" bbf using a 6.7" rod and an OTS keith black piston
http://www.corral.net/forums/showthread.php?s=&threadid=42318

i called summit, and the pistons are 357.00 for a .060 20cc dished piston.

anyone else have a piston they know about with a 1.25 compression height (or 1.35, either would work) and a 4.44" bore, with a .990 pin??? lookin to make a database of cheap ots pistons/rod combos so i can post it to my website...not interested in anything but 385 fords at this tame..
 

·
Registered
Joined
·
29 Posts
Discussion Starter #3
well if network54's server would come back up, you could click the link and find out...
i dont want to violate any rules, but if your interested e-mail me direct, or keep trying that link.
[email protected]
 
1 - 3 of 3 Posts
Top