527CI Carb Selection

1116 Views 10 Replies 9 Participants Last post by fogged408w, Feb 25, 2006

martynAK427

Discussion Starter · Feb 21, 2006

Hi Guys,

This post should really be posted on the Stroker Forum but id thought id ask here.
A friend of mine is building 460 stroked to 527 with ported iron heads. He advises me he will be using a holley 850CFM double pumper which IMHO seems a bit small for this build??? Can anyone advise on what would be the preffered carb'

Many thanks,
Martyn

See less See more

Save

1 - 2 of 11 Posts

fogged408w

· #2 · Feb 21, 2006

1050 dominator

Save

fogged408w

· #11 · Feb 25, 2006

On 2006-02-24 11:09, bonfire wrote:

I'm interested in what is required for a dominator to work on the street.

No matter what/who's carb your friend buys:

You need a 1 hr wide band o2 dyno session to make sure your air fuel ratios are good at all rpms. Bring some jets/air bleeds or make sure the dyno shop has some, and read up on jet/airbleed adjustments before you go.

<font size=-1>[ This Message was edited by: fogged408w on 2/25/06 11:48pm ]</font>

Save

1 - 2 of 11 Posts

This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.

Top Contributors this Month