[Is1BadFord]

Does anyone know the stock length of the control arms for a 1966 Mustang? I need the measurement from the mounting face to the center of the ball joint!

Thanks!

Cris

<font size=-1>[ This Message was edited by: Is1BadFord on 3/3/06 3:14pm ]</font>

 

[jd]

A quick measurement from my '66 that's torn down right now appears to be 9-5/8" from mounting flats on control arm shaft to estimated center of balljoint. Assume you meant upper control arm. hope this helps. jd

 

[Is1BadFord]

Yes, perfect! Thanks a ton! By the way, do you have the lower measurement as well? Car's across town (this is Phoenix, across town's nearly 90 miles), so I'm sort of relying on you guys to help out some =)

Cris

<font size=-1>[ This Message was edited by: Is1BadFord on 3/4/06 3:53am ]</font>

 

[jd]

same 66 stang,lower c/a is 13 1/8 ,center of bolt hole to center of balljoint stud. jd

 

[Is1BadFord]

Thanks again!

Cris