[bluetech]

Will front disc brakes from a '72 Mustang fit a '68 Mustang? Thanks.
_________________
67 Mustang S-Code GT Fastback project car
68 Torino GT Fastback project car

<font size=-1>[ This Message was edited by: bluetech on 1/2/02 1:59pm ]</font>

 

[dark7068]

the rotors on the 72 take bigger wheel bearings then the 68, so not unless you use the 72 spindles, no. They went to bigger bearings and spindles in 70.

Rick

 

[bluetech]

So if I take everything including spindles from the 72, it will be a bolt-on job. Thanks.

 

[dark7068]

yes. everything including prop. valve. if your going from drum to disk.

 

[MHumpy]

I don't know for positive, but I read that the taper on the outer tierod end is different. Everyhing else would work, just need to use a tierod end from a 71-72 mustang, so i was told.

<font size=-1>[ This Message was edited by: MHumpy on 1/21/02 6:15am ]</font>

 

[1FAST67]

<font color="blue">What about granada parts? I was told the stock 67/68 spindles could be used in the conversion by adding the caliper mounting bracket. Is this true?</font>