Ford Muscle Cars Tech Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
2,278 Posts
Discussion Starter · #1 ·
I learn alot about these things just from hearing the talk; 9" rearend with large bearing ends, daytona pinion, and 31 spline axles. What I need to know is just how much of this is really good to have and what is just extra? In my case a lot of extra time/money. My application will be in an FE powered 65 galaxie that will be brought to approx 450 HP and raced occasionally for fun, otherwise street driven. It has the stock 65 9" with the dimples in the back (not the usual hump), small bearing ends, and I'm sure 28 spline axles. I read that the 67 and up housings are stronger. Again, how much concern do I need to put to these details? I've already read the tech article on this forum, but need more info. I have retreived a C7AE 9" with the large bearing ends that I'm thinking of rebuilding, but it will need some work and fabrication to get it compatable with my 65 Gal. Just want to know if its worth the extra effort.

_________________
KEN
Factory 65 Galaxie 500 390/4v
79 Mercury Marquis 351w/2v daily driver

No matter how complicated something is or seems, always start with the simple basics then work your way to the rocket science !!!
Me

<font size=-1>[ This Message was edited by: v8shadow on 4/21/06 8:23am ]</font>

<font size=-1>[ This Message was edited by: v8shadow on 4/21/06 8:25am ]</font>

<font size=-1>[ This Message was edited by: v8shadow on 4/21/06 8:26am ]</font>
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top