Ford Muscle Cars Tech Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
456 Posts
Discussion Starter #1
My brother is installing a new camshaft in his 74' 460 in his four wheel drive. It is a Blue Racer cam with 214/224 dur @.050 lift and 280/290 advertised dur with gross valve lift of .516int/.543exh. My question is should he install adjustable rocker arms with this cam or can he use the factory pedastal rockers and shim as required?
 

·
Registered
Joined
·
557 Posts
It would be very wise to use adjustable valvetrain! That small bolt that holds the rockers to the pedistals, is just too small for the spring pressure that will be against it.
 
1 - 3 of 3 Posts
Top