Ford Muscle Cars Tech Forum banner

1 - 8 of 8 Posts

·
Registered
Joined
·
119 Posts
Discussion Starter · #1 ·
Thought I posted this before, but must've been during a bad time.

Anyway, only thing that was changed from previous build was a canton 'race' pan.

Engine (418 stroker/windsor), made 722 hp @ 7100 rpm, and 567 ft lbs tq @ 5800.

Only thing 'stock' ford on it is the timing cover.

dart block, afr 205 heads, usual crap.
if anyone wants the dyno sheet, or head flow charts, or cam specs, lemme know, .........nothing's top secret. :&gt
 

·
Registered
Joined
·
1,892 Posts
Nice!

I think those 205's might have a little work done.


Were you the guy with the block painted pink or something? Pink seems to give some horses.
I'd hate to do it. Then again it just might be worth it!!!
 

·
Registered
Joined
·
119 Posts
Discussion Starter · #4 ·
It's easier if I just email you the specs/flow chart/dyno sheets.
Send your email address to:

[email protected]

I'll gladly share ALL the important info with anyone that wants to hear.


Just for kicks, the heads were flowed/ported/flowed by Ryan of Eau Claire. He got the little 205s to flow 317 @ 700. (that's where the hp came up from year before).
Exhausts were really good.

Cam is a solid roller, custom grind by Isky. (again, email me for the exact specs). (too old to try to remember that crap off the top of my melon anymore)...................plus braggin' rights don't mean diddley (at least to me)....:&gt
 

·
Registered
Joined
·
119 Posts
Discussion Starter · #5 ·
Oh, by the way..........the block is PURPLE...........:&gt
 

·
Registered
Joined
·
1,892 Posts
Whoops! Must have needed to adjust my monitor.

It also gets down the track from what I remember reading.
 

·
Registered
Joined
·
1,950 Posts
Funny -- mine made 622 but it's a milder combo... anyway my buddy comes back from a car show on Sunday where a guy was trash talking me because he 'knows' that you can't get 622 from a 418W! Even though my car runs! -- He knows it's because of my secret nitrous! Imagine!

So you must be really crazy!
 

·
Registered
Joined
·
119 Posts
Discussion Starter · #8 ·
We made 620 hp 2 years ago with the unported 205 heads and a MUCH smaller solid lifter camshaft. BAsically the same amount of torque, but hp came WAY up with the headwork and solid roller.
Cam is 675 lift, (space the duration......but it thumps pretty good). :&gt
 
1 - 8 of 8 Posts
Top