C6 to E4OD
Join the discussion
Recommended Reading
-
Need help with a ford 9"
Tech ExchangeBought a ford 9" that needs a rebuild. It was under a 55 chevy and thats what I am putting it back in. Problem is, it has what seems to be a factory 31 spline clutchless posi unit in it with factory 3.55 gears. Did ford make this type of locker?- 0
- 48
-
Alan_G · updated
-
lowering 68 t-bird
Tech Exchangeany ideas on how to lower the front end of a 68 bird? I cut the springs but it sucks, going to get new springs to put back but b4 I would like to slam it, cant find drop spindles for it HELP!!!!!- 0
- 547
-
Attention on 10/08/2010
Tech ExchangeThere is an issue with images in all Tech Exchange articles. Contributors, Please do not alter your original article... I am in the process of getting the issue resolved. Sincerely, Rick DeVito- 0
- 2K
-
Automatic trans code...? Help
Tech ExchangeI have a few transmissions and looking for a certain one I have . I am near sure I found it but need a site to check the tag to be sure . I know there is a site that has all codes because I used to have it , forgot now . I have the 4 speeds , need autos . The numbers on the tag are...- 0
- 971
-
engine trouble
Tech ExchangeNew rebuilt 390 with elderbrock heads, only 400 miles. My problem is that oil is coming out of the intake bolts when i drive the car. Second problem when i start the car i don't hear any valve train noise but after about five minutes i start to hear valve train noise,also it has the erson roller...- 0
- 889
Join now to ask and comment!