Ford Muscle Cars Tech Forum banner

1 - 7 of 7 Posts

·
Premium Member
Joined
·
297 Posts
Discussion Starter #1
Hi folks, Need some help, I checked these pics against the diagrams in the Ford shop manual,but something looks wrong....one of my pics has one of the cable hooks broke, but the other does not.the adjusting lever looks like it isn't sitting correctly on the adjusting screw... Is this because the shoes are the wrong ones ??
Thanks in advance !!
Red
 

Attachments

·
Premium Member
Joined
·
5,862 Posts
Red, can you post bigger pics?
 

·
Premium Member
Joined
·
297 Posts
Discussion Starter #3
Dang...I thought they would be bigger....I'll try..
 

·
Premium Member
Joined
·
5,862 Posts
Maybe these hopefully bigger ones will get some ideas
 

Attachments

·
Registered
Joined
·
1,495 Posts
lower spring on the right side is the wrong one. look how it is installed on the left-it is correct. i would get a hardware kit. also pull the dust boots back to look for fluid inside. if there is you need to rebuild the cyls too
 
1 - 7 of 7 Posts
Top