Ford Muscle Cars Tech Forum banner

Erson HI-FLOW 1M

1849 Views 4 Replies 3 Participants Last post by  mavman
I have an erson cam out of an engine a freind gave me. Does anyone know what distributor gear I would use with it? This is an engine he raced in the sventies and eighties.
1 - 5 of 5 Posts
Do you know if its a roller or flat tappet cam?? if its a roller go with a steel gear and flat tappet cast gear
thats a flat tappet iron cam. I use the same cam. Great camshaft for a mild build small block. Use an iron gear.
Thanks guy's
Mavman anyway you would have the cam card for the cam ?

<font size=-1>[ This Message was edited by: Freddie on 3/22/06 7:14am ]</font>
Lemme see if I can find it...I "should" have it around here (somewhere in this mess)
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.