Ford oval replacement filter
Join the discussion
Recommended Reading
-
How should I plumb this?
All Ford TechboardI have a 69 Fairlane that had factory air, doesn't now, will again one day. I have a 408 stroker in it now, and I want heat inside the car. Until now nothing was connected to the heater core and water pump and thermostat housing were all plugged. There are 3 pipes to the heater core on the...- 8
- 231
-
Intermittent engine miss.
All Ford TechboardNew to the site looking for answers. Have a 68 Mustang with a 5.0L, had installed Pertronix ignitor 3 kit on 4 years ago still using the resistor wire and had no problems until this year. When starting the engine it would kick back on the starter, removed coil wire, it turned over fine, bought a...- 2
- 48
-
What is a stinger ignition system (joe sherman)
All Ford TechboardI was reading one of big joes articles and he mentioned a stinger ignition. I never heard of it and couldnt find it online. Is that like the petronix points to electronic conversion?- 12
- 11K
-
82 Ford Fairmont
All Ford TechboardHi I've got a 1982 ford Fairmont with the straight 6 in it I was wondering what's the easiest engine swap I could do with her and maybe get a bit more power thanks- 3
- 233
-
Tawhman · updated
-
Odd thrust washer bolts
All Ford TechboardTearing my engine down for an overhaul. It’s a ‘62 221 V8. Things came to a halt when I ran into this. Was this a factory bolt head design, or switched to when engine was rebuilt 40 years ago? Who makes a bit for these? I saw nothing online. BTW, Argh!- 5
- 467
Join now to ask and comment!