[bprigge]

Can anybody tell me if a 302 roller cam
has a fuel pumb drive lobe on it for use
with a mechanical fuel pump? I need to
know about both the stock roller cam and
-303E, B, X, etc. cams from Ford Racing.
I guess what I really need to know is if
you can put a mechanical fuel pump on a
86 and up roller motor??

thanks, Bruce


'83 Mustang GT
'89 Tbird

 

[bprigge]

thanks!


Bruce

 

[bprigge]

thanks everybody.

I'm building a mostly '90 roller motor
and am down to picking a cam. I was afraid I
was going to have to go the electric fuel pump route. I'm leaning towards a FRPP
..303E cam. Looks like a lot of other people
are also. The 303E's on EBAY are fetching
big bucks, for used cams anyway. This is
going into an '83 GT street car that is on
the road now with a stock '83 HO motor.

 

[bprigge]

Nastystang....thats pretty impressive!

Is/was that motor hard to live with?
I run a 3.47 rear end and cruise on the
interstate at about 2600. Would the
B cam handle that OK?

Bruce