Ford Muscle Cars Tech Forum banner

1 - 4 of 4 Posts

·
Registered
Joined
·
94 Posts
Discussion Starter #1
My Dad just bought a 62 G-code Galaxie 500, body only. It does have the rearend in it. My question, before I tear into it is, should it have 31 spline axles? It has the two rib case, like a "N" case, without the "N". Is the case a "WAR" case or a good nodular one. Last question, anyone got a good 406 6V setup they want to sell "cheap"? Thanks, Matt.
 

·
Registered
Joined
·
522 Posts
The third member is not a WAR case. It is probably not Nodular iron. It probably is not 31 spline axles either. It may possibly be a 31 spline axle. If it is a 406 it may have been swapped as these cars were often beat on. The best way to tell is if the tag is intact. If not remove an axle and check.
I don't have any documentation that the Nodular iron cases were available this early.
There is often 6V stuff on Ebay,but usually people get stupid and bid it up too high. A good 4V on an aluminum intake will work much better, but doesn't look as good. Tear that rear apart and check!
 
1 - 4 of 4 Posts
Top