Ford Muscle Cars Tech Forum banner
1 - 2 of 2 Posts

· Premium Member
Joined
·
171 Posts
Discussion Starter · #1 ·
I am building up a 331 stroker for my Mustang. I am thinking about utilizing the Scat 9000 crank, forged pistons from probe so they will accomadate my TFS twisted wedge heads and forged I beam rods. What is the best Harmonic Balancer to use now? And I wanted to utilize a aluminum flywheel. What brand flywheel should I use?

Any suggestions a good dealer to purchase the parts from including the stroker rotation assembly?
 

· Premium Member
Joined
·
171 Posts
Discussion Starter · #3 ·
Thanks for the reply. However, that was not what I was asking. I was needing some advice on what 'brand' of harmonic balancer or aluminum flywheel to use.

I have heard you need to be very careful with regard to harmonic balancers. ' Fluid Dampner' sounds like a good unit but I have never used one.

HELP!
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top